Time5300 Era Leeb Hardness Tester

TIME5300 Portable Leeb Hardness Tester Product Overview Installed Mechanical or Permanent Assembled Components

TIME5300Product Overview of Portable Leeb Hardness Tester
♦ Installed mechanical or permanently assembled components.
♦ Mold cavity.
♦ Heavy duty workpieces.
♦ Failure analysis of pressure vessels, steam turbine generators and their equipment.
♦ Measuring workpieces with limited space.
♦ Bearings and other components.
♦ Classification of materials in metal material warehouses.
♦ Rapid inspection of multiple measurement points in a large area of large workpieces

2. Product functional features
♦ Can achieve interconversion between 6 hardness levels (HL, HRB, HRC, HB, HV, HS) and interconversion with tensile strength
♦ The host can be equipped with 7 types of impact devices for use, which do not require recalibration during replacement and automatically identify the type of impact device
♦ It can display information such as measurement values, average values, dates, impact directions, measurement times, test materials, hardness values, etc
♦ Equipped with charging indicator and low voltage alarm function
♦ Equipped with indication soft calibration function

3. Product Technical Parameters

Product features	parameter
Testeable hardness system	HL、 HRC、HRB、HV、HB、HS
test accuracy	Relative error ± 0.8%, indication repeatability error 0.8 (HLD=800)
Standard impact device	D-type impact device
Setting the measurement range for upper and lower limits	（170～960）HLD
Optional impact device	D/ C /DC / D+15 / DL/ G
Number of impact devices that can be equipped at the same time	a set
computer interface	none
display text	English
screen display	No backlight
Testing direction	arbitrary
Data storage	none
Measure the maximum hardness fluctuation value of the workpiece	940HV (D/DC/DL/D+15/C impact device)
Measure the curvature radius of the workpiece	Rmin=50mm (using a special-shaped support ring Rmin=10mm)
Identification function	Automatic recognition of impact device type function
Printer type	Plug in pin printer
Quantity of testing materials	9 types (excluding stainless steel) are detailed in Table 1 of the attachment;
Automatic voltage detection	none
power supply	Rechargeable battery NIMH4.8V, 1200mAh
charger	9V75mA
Overall dimensions	270×86×47mm
weight	650g (including impact device and printer)

4. Basic product configuration
1 host (including printer);
One D-type impact device
1 small support ring;
1 nylon brush;
1 high-value standard Leeb hardness block;
1 charger;
1 roll of printing paper
Note: The weight of the workpiece measured by this hardness tester must be greater than 5KG