The constant temperature and humidity test chamber, a walk-in constant temperature and humidity aging room, is mainly composed of a control panel, a distribution panel, a moisture storage panel, a fan, a heater, a humidifier, and a freezer. Provide large-scale components, semi-finished products, finished products, and temperature control services in the industry
Constant temperature and humidity test chamber_Walk in constant temperature and humidity aging room
The walk-in constant temperature and humidity laboratory is mainly composed of a control panel, a distribution panel, a moisture storage board, a fan, a heater, a humidifier, and a freezer.
Provide testing for large-scale components, semi-finished products, finished products, and temperature and humidity environments in the industry, such as computer terminals and automotive parts.
Implement standards and test methods that meet the requirements
-
GB2423.1-2008/1EC6008-2-1-2007 Low temperature test method
-
GB/T2423.2-2008 High temperature test methods
-
GJB150.3A-2009 High temperature test method
-
GJB150.4A-2009 Low temperature test method
-
GB2423.22-2008 Test Method for Temperature Change Rate
-
GBT2424.5-2006 Performance Confirmation of Temperature Test Chamber
-
GB/T10586-2008 Technical Conditions for Low Temperature Test Chamber
-
GB/T2423.3-2008 (1EC68-2-3) Constant Damp Heat Test Method
-
GJB150.9A-2009 Damp Heat Test Method
-
G/BT2423.4-2008/1EC6008-2-30:2005 Alternating Damp Heat Method
-
GB/T5170.18-2005 Basic parameter calibration method for testing equipment
-
GB/T10586-2006 Technical Conditions for Damp Heat Test Chamber
-
GBT2424.6-2006 Performance Confirmation of Temperature and Humidity Test Chamber
-
GBT2424.7-2006 (with load) Temperature test chamber measurement
characteristic
-
The appearance of the walk-in constant temperature and humidity aging room can be matched with different colors or designed with all stainless steel according to the interior design. The indoor space is made of SUS304 # stainless steel
-
Rectangular laminated glass observation window, which can be used for observing the test sample during the experiment. The window is equipped with an anti sweat electric heater device to prevent water vapor from condensing into water droplets
-
Install explosion-proof lights indoors, allowing for clear observation of product testing conditions during testing. Install anti slip aluminum plates at the bottom of the laboratory for safe use
-
The box door is equipped with insulation sealing strips, which can effectively isolate internal temperature leaks
-
Equipped with a pure water filtration unit, it can directly filter tap water without the need for manual water addition, making it easy to use
-
The refrigeration and dehumidification system adopts imported brand compressors, which have the advantages of energy saving, low noise, low energy consumption, stable performance, etc. It uses environmentally friendly refrigerants (R23, R404a)
-
The controller adopts an imported LCD display screen, which can simultaneously display measured values, set values, time, etc.
-
The controller has multi-stage program editing and temperature, and humidity can be controlled quickly (QUICK) or with slope (SLOPE)
-
TEMI2700 has a 7.5-inch true color LCD display screen with RS-232/RS-485 communication interface and a 2GB standard SD memory card, which can be connected to Ethernet for use. TEMI880 has a 5.7-inch color display screen with RS-232/RS-485 communication interface (optional according to requirements)
-
The bottom of the walking in constant temperature and humidity aging room machine is welded with channel steel into a mesh structure to increase load-bearing capacity, which never deforms during use. The bottom of the integrated laboratory is equipped with mobile casters to position the foot cup, and the bottom channel steel of the assembled test is directly installed on the ground