Welcome Customer !

Membership

Help

Tianjin Weisi Experimental Instrument Technology Co., Ltd
Custom manufacturer

Main Products:

foodequippro>Products

Tianjin Weisi Experimental Instrument Technology Co., Ltd

  • E-mail

  • Phone

    18998013185

  • Address

    Xixiaozhuang Village, Chagugang Town, Wuqing District, Tianjin City

Contact Now

Tianjin Sand and Dust Testing Machine

NegotiableUpdate on 08/05
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Main purpose: Suitable for experiments on preventing sand and dust from entering the casing of electromechanical equipment and sealing components in a dusty environment. To test the performance of the test sample in the use, storage, and transportation of sand and dust environments. This device meets the relevant national standards and shell protection levels.

Product Details

  • Main purpose: Suitable for experiments on preventing sand and dust from entering the casing of electromechanical equipment and sealing components in a dusty environment. To test the performance of the test sample in the use, storage, and transportation of sand and dust environments. This device meets the relevant national standards and shell protection levels. 1. Main technical features 1.1 Effective volume: 2197 liters 1.2 Internal effective dimensions: 1300 × 1300 × 1300mm (width × depth × height) 1.3 Air duct cross-sectional dimensions: 1300 × 1300mm (width × height) 1.4 Box external dimensions: 7800 × 5300 × 2500mm (width × depth × height) 1.5 Structure: Horizontal 1.6 Wind speed: adjustable in the range of 1.2m/s to 8.9 m/s and 18 m/s to 30m/s. 1.7 Temperature range: adjustable from room temperature to+80 ℃ 1.8 Relative humidity range: ≤ 22% RH 1.9 Dust blowing experiment: 1.9.1 Dust blowing air velocity: 1.2m/s to 8.9 m/s 1.9.2 Dust blowing concentration: 0.1g to 100.6 ± 7g/m3 (sand particle diameter ≤ 149um); (Including sand and dust concentration sensor) 1.9.3 Sand and dust composition (small particles in the experiment can be combined with the following components in any weight ratio): Use common red porcelain clay or widely used quartz powder. Among them, quartz powder contains 97-99% (by weight), and the main components of red porcelain clay include: calcium carbonate, magnesium carbonate, magnesium oxide, titanium dioxide, etc. 5% iron oxide (ferric oxide) 10 ± 5% aluminum oxide (aluminum oxide) 20 ± 5%, and other components are silicon dioxide. 1.10 Sand blowing experiment 1.10.1 Wind speed 0.1-30m/s; Interval adjustable 1.10.2 Sand blowing concentration: 1.1g/m3 ± 0.25/m3~100g/m3 ± 0.5/m3; 100g/m3/d (including sand and dust concentration sensor) 1.10.3 Sand and dust composition: If there are no other clear regulations, quartz sand (with silica content above 95% specific gravity) is used for large sand particles. 1.10.4 Sand particle diameter: 150um ≤ sand particle diameter ≤ 850um; 1.11 Collection system: The system can automatically collect falling sand particles and continue to circulate in the box. 1.12 Box sealing: There is no dust leakage during operation, which can effectively protect the surrounding environment from pollution. 1.13 Noise:<70 dB (A) measured 10 meters in front. 1.14 Inner container material: AISI304 stainless steel 1.15 outer body sprayed with RAL7047 gray white, decorated with RAL5015 blue. 1.16 Box door: Fully open single wing type (1300 × 1300mm), with double-layer silicone rubber seal and door lock. 1.17 Observation window (400 × 600mm) with heating protective film. 1.18 Automatic vacuum cleaning system. 1.19 Wind speed simulation system: Strong winds are generated by high-power centrifugal fans, and the wind speed is automatically adjusted by a frequency converter. The 1.20 rotary table (diameter 800mm) rotates counterclockwise at a rate of 1 revolution per minute, providing some slots to secure the specimen. The motor shaft of the rotary table is sealed with an O-ring. The 1.21 collector (funnel-shaped) is located at the lower part of the testing space. The 1.22 air compressor controls the switch and air purification through the pneumatic valve on the machine. 1.23 50kg sand can operate normally for 5 years. 1.24 Equipment weight: about 3000kg. 1.25 Box control functions: temperature in Celsius, relative humidity, wind speed in meters per second, sand density in grams per cubic meter. 2. Configuration description. 2.1 Upper computer control system includes: 1 Dell computer (mainstream market configuration), and RS232 serial port and other configurations. 2.2 The control functions of the upper computer include: the rise and fall of each program curve, as well as the storage of test data on the USB flash drive. The test process is displayed, programmed, and monitored. Practical printing settings are set, preset alarm conditions are set, and the vibration test switch is timed to start. 2.3 HP laser printer 2.4 sand meter 2.5 automatic feedback control: wind speed automatic feedback control adjustment. There are two anemometers inside the box, one is a "hot wire" type and the other is a "rotating" type. Ultrasonic wind speed and direction sensors measure horizontal wind speed and direction through ultrasound. The measurement is based on ultrasound transmission time, and the transmission time of ultrasound from one probe to another depends on the wind speed. The transmission time is measured in two directions of a pair of probes. Take two measurements from each position of the three ultrasonic paths at a 60 ° angle to each other, and calculate the wind speed and direction. The calculation method of wind measurement values can completely eliminate the influence of installation height, temperature, and humidity. The accuracy of the anemometer can reach 0.5m/s. 3. Safety protection measures 3.1 Safe and reliable grounding protection devices; 3.2 Power undervoltage, leakage and phase loss protection; 3.3 Independent studio overheating protection; 3.4 Compressor overload protection; 3.5 Heater short circuit/overload protection; 3.6 Overload protection for blower motor; 3.7 The system detects the activation of a protective device, which automatically shuts down and displays an alarm. 4. Usage condition 4.1 Venue: The ground is flat and well ventilated. There is no strong vibration or electromagnetic field around the equipment. There are no flammable, explosive, corrosive substances or dust around the equipment. Ground bearing capacity: not less than 800kg/㎡. Reserve approximately 1500mm of operation and maintenance space around the equipment. 4.2 Working environment: Temperature: 5 ℃~35 ℃; Relative humidity: ≤ 85%; Air pressure: 86kPa~106kPa; 4.3 Power supply conditions: Installation power: 125kW, equipped with independent air circuit breakers; Supply voltage: 380 V ± 10%/50Hz/3ph+N+G; Grounding resistance: ≤ 4 Ω. 4.4 Circulating cooling water: pressure 2-4 bar, temperature ≤ 30 ℃, flow rate ≥ 10m ³/h. 4.5 Compressed air: pressure of 6-8 bar, dew point ≤ -10 ℃, flow rate ≥ 40m?/h. 5. Technical data and attachments 5.1 Technical data: Product certificate, factory inspection report, user manual, electrical schematic diagram, refrigeration system diagram, etc. 5.2 Attachment: One set of vulnerable parts (including 2 PT100 platinum resistors) 6. The product meets the experimental methods: IEC 60068-2-68 and MIL-STD-810G method 510.5