The Guangzhou Composite Salt Spray Test Chamber is an environmental test that mainly uses artificial simulated salt spray environmental conditions created by salt spray testing equipment to assess the corrosion resistance of products or metal materials. Compared with the natural environment, the salt concentration of chloride in the salt spray environment can
The Guangzhou Composite Salt Spray Test Chamber is an environmental test that mainly uses artificial simulated salt spray environmental conditions created by salt spray testing equipment to assess the corrosion resistance of products or metal materials. Compared with natural environments, the salt concentration of chloride in the salt spray environment can be several times or tens of times higher than that in general natural environments, greatly improving the corrosion rate and shortening the time required to obtain results for salt spray testing of products. If a product sample is tested under natural exposure conditions, it may take up to 1 year for it to corrode, while testing under artificial simulated salt spray conditions only takes 24 hours to obtain similar results.
Spray mode of Guangzhou composite salt spray test chamber:
1. spray volume: spray tower is set in the middle of the laboratory to make the fog fall evenly, and can be adjusted to 1~2 ml 80 cm2/hr (16 hour average volume);
2. Adopting the Bernoulli principle to absorb saltwater and then atomize it uniformly, without any obstruction or crystallization, ensuring the standard of continuous testing;
3. Nozzle: It is made of special glass nozzle, and its service time can reach 4200H. The size of spray volume and spray angle can be adjusted.
Safety protection device for Guangzhou composite salt spray test chamber:
1. Automatic power-off device when the water level is low
2. Automatic power-off device when overheating occurs
3. Attach safety warning light device
Structural characteristics of Guangzhou composite salt spray test chamber:
1. The laboratory basket frame adopts a flat dividing frame, which can adjust the angle freely. The four sides are completely consistent in terms of falling and receiving fog, and there are a large number of test pieces placed;
2. The laboratory uses P.V.C polyvinyl chloride board (Taiwan) with a thickness of 5mm and a temperature resistance of up to 80 ℃;
3. The saturated air tank is made of SUS # 304 stainless steel, which has excellent insulation effect under high pressure;
4. The laboratory sealing cover adopts acrylic impact resistant board with a thickness of 6mm;
5. The reagent replenishment bottle adopts a hidden water level perspective window, which is easy to clean and not easy to break