Tianjin UV climate resistance tester 225 L Precautions during use: 1 The Tianjin UV climate resistance testing machine has a constant temperature and humidity machine with a test hole on the machine side, which can be used when connected to the testing circuit inside the box two If you want to observe the changes inside the box during testing, you can open the chamber
Tianjin UV climate resistance tester 225 L Precautions during use:
1. The Tianjin UV climate resistance testing machine has a constant temperature and humidity machine with a test hole on the machine side, which can be used when connected to the testing circuit inside the box
If you want to observe the changes inside the box during the test, you can turn on the indoor light switch and learn about the internal changes through the window
3. If the machine operates below 0 ℃, try to avoid opening the box door as much as possible, because opening the box door at low temperatures can easily cause ice sealing in the internal evaporator and other parts, especially the lower the temperature, the more serious the situation. If it must be opened, try to shorten the opening time as much as possible
When completing low-temperature operation, it is necessary to set the temperature condition at 60 ℃ and perform drying treatment for about half an hour to avoid affecting the measurement time of the next operating condition or icing phenomenon
5. The radiator (condenser) of the freezer should be regularly maintained and kept clean
6. The inlet pipe of the humidification bucket must completely discharge the remaining air to prevent water from entering
*Special attention:
After the Tianjin UV climate resistance testing machine completes low-temperature operation, if there is no work listed in point 6 above, it is also necessary to set the room temperature condition (30 ± 5 ℃) to ensure that the temperature inside the box is at room temperature when stopped, so as not to affect the freezing phenomenon caused by the low temperature inside the box and the fogging phenomenon of the window glass
7. During operation, unless absolutely necessary, please do not open the box door, otherwise it may lead to the following adverse consequences:
It is very dangerous for high temperature and humidity to rush out of the box
The inside of the box door still maintains high temperature, causing injury
High temperature air may trigger a fire alarm and cause misoperation
8. Tianjin UV climate resistance testing machine. Please note that this machine must be safely grounded to prevent static electricity induction
9. Avoid shutting down and restarting the freezing unit within three minutes
10. If a heating sample is placed inside the box, please use an external power supply for the sample power control, and do not directly use the local power supply.
11. Circuit breakers and over temperature protectors are provided for the safety protection of operators during testing, so please check them regularly
The correct installation of wet ball gauze is necessary to ensure the correct measurement of relative humidity
13. It is absolutely prohibited to test explosive, flammable, and highly corrosive substances
14. Please read the controller manual and related instructions carefully before operating this machine.