RSWA-F1 Ultrasonic Imaging Solder Joint Analyzer

Product Introduction

The RSWA F1 automotive spot welding analyzer produced by Tessonics is a product developed and designed for high-quality quality control and non-destructive evaluation of resistance spot welding. Resistance spot welding analyzer is a portable and easy to operate device that can clearly image the internal structure of spot welding. In addition to real-time imaging display, it is also possible to evaluate the diameter of solder joints and compare it with the pre-set minimum solder joint requirements.

The RSWA F1 spot welding analyzer uses a unique technology of multi-channel ultrasonic matrix sensors to obtain data from the internal structure and surface of the welding point. These data are reconstructed into solder joint images using special algorithms, and the average diameter of the solder joint area is estimated in real-time.

Features:

*Single frame acquisition and sustainable data acquisition mode (up to 3 frames per second)

*Automatic and manual solder joint size estimation

*Automatically detect the scanning depth inside the solder joint

*Set three levels of user interface based on different operating skills and complexity

*Built in reporting system and file storage function

Application:

Metal stack: 2T and 3T; 0.6-3.0mm metal thickness

Material types: Low carbon steel, high-strength steel, galvanized sheet, etc

Coating: uncoated, galvanized (electroplated galvanized steel sheet, hot-dip galvanized steel sheet), electrophoretic paint, paint, etc

Performance parameters:

The RSWA F1 spot welding analyzer uses a unique technology of multi-channel ultrasonic matrix sensors to obtain data from the internal structure and surface of the welding point. These data are reconstructed into solder joint images using special algorithms, and the average diameter of the solder joint area is estimated in real-time.

Specification and Performance

processor

Intel Pentium 3 processor, 600MHz, industrial grade

memory

256 MB

hard disk

2.5-inch 30GB IDE industrial grade

monitor

8.4英寸 TFT/VE-TFT Color SVGA

800 × 600

Resistive industrial touch screen

Removable screen protector film

External port

Laptop card slot: Type-I or Type-II,

PCMCIA Card Bus 3.0 Version

Flash card slot: Standard 50 pin flash card

Integrated interface: RJ-11, USB, built-in camera,

Sound input, stereo output, infrared interface 1.1

power

Internal battery: 6-cell lithium battery pack;

External battery: 80Wh

Average battery operating time: 6-8 hours

Charging time: 4-8 hours

Power adapter: 100-240V, 50-60 Hz

temperature range

5º-40º C

Storage temperature

-20º- 60º C

Size:

32 × 20 × 7.5 centimeters

Weight including battery

3 kilograms (7 pounds)

sensor probe

52通道

Matrix diameter: 10 millimeters

Frequency: 15 MHz

stainless steel casing

Polystyrene anti-aging delay line

cable

Length: 2 meters

52 coaxial transmission channel

Kevlar protective layer

Additional fiberglass protective layer