Split type sanitary turbine flowmeter

Product Details:

Split type sanitary turbine flowmeterIt is a flow meter specially developed for the food industry, equipped with a sanitary liquid turbine flowmeter with sanitary fittings, which can be applied in the food and pharmaceutical industries.

Split type sanitary turbine flowmeterThe structure is designed to be explosion-proof and can display the total flow rate, instantaneous flow rate, and flow rate percentage. The battery adopts a long-lasting lithium battery, and the service life of a single function odometer battery can reach more than 5 years, while the service life of a multifunctional display meter battery can also reach more than 12 months.

The head of a sanitary liquid turbine flowmeter can display a wide range of flow units, including cubic meters, gallons, liters, standard cubic meters, standard liters, etc. It can set fixed pressure and temperature parameters to compensate for gases. In situations where pressure and temperature parameters do not change significantly, this instrument can be used for fixed compensation accumulation.

Product Features:

1. High precision, generally up to ± 1% R, ± 0.5% R, and high-precision models up to ± 0.2% R;

2. Good repeatability, short-term repeatability can reach 0.05%~0.2%. It is precisely because of its good repeatability that frequent calibration or online calibration can achieve extremely high accuracy, making it a preferred flowmeter in trade settlement;

3. Equipped with three-point correction of instrument coefficients, intelligent compensation of instrument coefficient nonlinearity, and on-site correction capability;

4. Keep all valid data intact for 10 years after power failure;

5. Wide range, with a medium to large caliber of up to 1:20 and a small caliber of 1:10;

6. Compact and lightweight structure, easy installation and maintenance, and high circulation capacity;

7. Suitable for high voltage measurement, there is no need to open holes on the instrument body, making it easy to make high voltage instruments;

8. There are various types of sensors available, which can be designed according to the specific needs of users, such as low-temperature, bidirectional, downhole, mixed sand, etc

9. Can be made into an insertion type, suitable for measuring large diameters, with low pressure loss, low price, can be removed without interruption, and easy installation and maintenance;

Technical parameters:

Nominal diameter: Pipeline type: DN4~DN200 Insertion type: DN100~DN2000

Accuracy level: Pipeline type: ± 0.5 level, ± 1.0 level

Insertion type: ± 1.5 level, ± 2.5 level

Environmental temperature: -20 ℃~50 ℃

Medium temperature: Measuring liquid: -20 ℃~120 ℃

Measurement gas: -20 ℃~80 ℃

Atmospheric pressure: 86KPa~106KPa

Nominal pressure:1.6MpaThe2.5MpaThe6.4MpaThe25Mpa

Explosion proof grade: ExdIIBT4

Connection methods: threaded connection, flange clamping, flange connection, plug-in, etc

Requirements for straight pipe section: Gas: The upstream straight pipe section should be ≥ 10DN, and the downstream straight pipe section should be ≥ 5DN

Liquid: The upstream straight pipe section should be ≥ 20DN, and the downstream straight pipe section should be ≥ 5DN

Insertion type: The upstream straight pipe section should be ≥ 20DS, and the downstream straight pipe section should be ≥ 7DS (DS is the measured inner diameter of the pipeline)

Sanitary liquid turbine flowmeter display mode:

(1) Remote transmission display: pulse output, current output (with display instrument)

(2) On site display: 8-bit LCD displays cumulative flow rate, unit (m3)

4-digit LCD displays instantaneous flow rate, unit (m3/h), battery level, frequency, and flow rate

(3) Temperature and pressure compensation type:

A、 Display standard instantaneous flow and standard cumulative flow

B、 Display current pressure, temperature, battery voltage

Output function:

(1) Pulse output, p-p value determined by the power supply

(2) 4-20mA two-wire current output

(3) Unit volume pulse output and sensor raw pulse output

(4) Equipped with RS485 communication interface

Power supply

（1）DC5～24V

(2) The standard 3V lithium battery installed inside the instrument panel can be used continuously for more than eight years

(3) Temperature pressure compensation type 3V lithium battery installed inside the instrument can be continuously used for more than four years

Transmission distance:The distance from the sensor to the display can reach 500m

Clamp connection liquid flowmeter, pharmaceutical factory sanitary flowmeter, pure water flowmeter, sanitary turbine flowmeter, tap water flowmeter, water flow sensor, Guangzhou sanitary flowmeter, impeller flowmeter