RS8107 Vibration Speed Sensor

NegotiableUpdate on 12/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The RS8107 vibration sensor is a low-frequency sensor that can measure machine vibration at a speed of 300 revolutions per minute. For conventional vibration speed sensors, they can only measure machine vibrations above 600 revolutions per minute. So when measuring the vibration of low-speed machines, users must pay attention to the low-frequency characteristic indicators of the sensor when choosing. Suitable for blowers, centrifugal separators, engines, impellers, generators, pumps, etc.

Product Details

After being connected with vibration and intensity scales, the RS8107 vibration magneto electric velocity sensor can measure various vibration displacements, velocities, etc. The vibration of the rotor supported by rolling bearings will be sufficiently transmitted to the bearing seat. The speed sensor installed on the bearing seat or very close to the bearing housing outputs voltage by cutting magnetic lines through internal motion coils, providing signals to monitoring instruments for predicting and alarming mechanical faults.

detailed description

Frequency response:
RS8107H：5Hz～1000Hz（－3db）
RS8107V：5Hz～1000Hz（－3db）
Sensitivity: 20.0mv/mm s-1, ± 5%
(Measured at 80Hz and a speed of 10mm/s)
Linearity of amplitude:<3%
Horizontal sensitivity ratio:<5
Maximum measurable displacement: 1mm (single peak)
Working direction: with the sensor installation surface at 0 ° below
RS8107H 90 °± 2.5 ° (horizontal installation type)
RS8107V 0 °± 2.5 ° (vertical installation type)
Output resistance: ≤ 900 Ω
Insulation resistance:>2M Ω
Temperature range for use: Standard type: -30~120 ℃
Environmental conditions: dustproof, moisture-proof (95% non condensing)
Weight: 400g
Dimensions: Ø 41 × 92mm
Installation method:
Fix it with an M6.M8 double headed bolt in the center hole of the base
Fixed with quick release strong magnetic suction seat (for on-site inspection)