Welcome Customer !

Membership

Help

Beijing Topraysheng Measurement and Control Technology Co., Ltd
Custom manufacturer

Main Products:

foodequippro>Products

Beijing Topraysheng Measurement and Control Technology Co., Ltd

  • E-mail

    bj_tprs@163.com

  • Phone

    13311288638

  • Address

    2nd Floor, Building 1, Zhongli Science and Technology Park, Third Street, Shangdi Information Industry Base, Haidian District, Beijing

Contact Now

RC6050T accelerometer sensor

NegotiableUpdate on 12/03
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The RC6000 series piezoelectric accelerometer (hereinafter referred to as accelerometer) can be widely used for vibration and impact measurement in aerospace, national defense and military industry, metallurgical machinery, vehicle transportation, bridges and ships, civil engineering and construction, teaching experiments, and other fields. It has the advantages of wide frequency response, high sensitivity, low lateral sensitivity, and strong resistance to external interference. An accelerometer consists of a base, a mass block, a sensing element, and a housing. The function of an accelerometer is to be paired with a charge amplifier to accurately restore the measured signal. The working principle is a type of electromechanical energy conversion product manufactured using the piezoelectric effect of piezoelectric ceramics.

Product Details

The RC6050T series piezoelectric accelerometer (hereinafter referred to as accelerometer) can be widely used for vibration and impact measurement in aerospace, national defense and military industry, metallurgical machinery, vehicle transportation, bridges and ships, civil engineering and construction, teaching experiments and other fields. It has the advantages of wide frequency response, high sensitivity, low lateral sensitivity and strong resistance to external interference. An accelerometer consists of a base, a mass block, a sensing element, and a housing. The function of an accelerometer is to be paired with a charge amplifier to accurately restore the measured signal. The working principle is a type of electromechanical energy conversion product manufactured using the piezoelectric effect of piezoelectric ceramics.

Features:
● Built in IEPE preamplifier
Can be paired with ordinary coaxial shielded cables
Simplify the testing system

Main technical indicators:

dynamic characteristics

Measurement range (peak value)

±100g

Sensitivity (25 ℃) ± 5%

50mV/g (160Hz)

Frequency response (± 1dB)

0.5-8,000Hz

Install resonant frequency

≥30,000Hz

Lateral sensitivity ratio

≤5%

Electrical performance

excitation voltage

18VDC-28VDC (constant current source)

Constant current source excitation (mA)

2-10mA

Output impedance

<100 Ω

Full range output (peak)

±5V

noise

<50μV

bias voltage

+9- +12V

Environmental characteristics

Operating Temperature

-40℃~+120℃

Impact limit (peak value)

±3000 g

temperature response

See attached figure

physical properties

structural form

cut

Shell material

304 stainless steel

output method

Top M5

Installation method

M5

piezoelectric material

PZT-5

weight

~13 grams

Attachment

Install the bolt

M5

cable

Dual ended M5 universal coaxial cable 2 meters