-
E-mail
bj_tprs@163.com
-
Phone
13311288638
-
Address
2nd Floor, Building 1, Zhongli Science and Technology Park, Third Street, Shangdi Information Industry Base, Haidian District, Beijing
Product Categories
Beijing Topraysheng Measurement and Control Technology Co., Ltd
RC6100S accelerometer sensor
NegotiableUpdate on 12/03
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The RC6100 series accelerometer is widely used for monitoring the operating status of equipment in various industries. The vibration level during equipment operation is an important indicator for estimating whether the equipment is running normally. The output signal is filtered and detected to provide accurate and intuitive indications of the vibration level of the equipment. It can be widely used for vibration and impact measurement in aerospace, national defense and military industry, metallurgical machinery, vehicle transportation, bridges and ships, civil engineering and construction, teaching experiments, etc. It has the advantages of wide frequency response, high sensitivity, low lateral sensitivity, and strong resistance to external interference. An accelerometer consists of a base, a mass block, a sensing element, and a housing. The function of an accelerometer is to be paired with a charge amplifier to accurately restore the measured signal. The working principle is a type of electromechanical energy conversion product manufactured using the piezoelectric effect of piezoelectric ceramics.
Product Details
The RC6100 series accelerometer is widely used for monitoring the operating status of equipment in various industries. The vibration level during equipment operation is an important indicator for estimating whether the equipment is running normally. The output signal is filtered and detected to provide accurate and intuitive indications of the vibration level of the equipment. It can be widely used for vibration and impact measurement in aerospace, national defense and military industry, metallurgical machinery, vehicle transportation, bridges and ships, civil engineering and construction, teaching experiments, etc. It has the advantages of wide frequency response, high sensitivity, low lateral sensitivity, and strong resistance to external interference. An accelerometer consists of a base, a mass block, a sensing element, and a housing. The function of an accelerometer is to be paired with a charge amplifier to accurately restore the measured signal. The working principle is a type of electromechanical energy conversion product manufactured using the piezoelectric effect of piezoelectric ceramics.
Product Features
ICP/IEPE accelerometer sensor
Maximum long-distance transmission of 300 meters
Low noise ≤ 100uV
Technical Specifications
Product Model: RC6100S
Sensitivity: 100mV/g
Frequency response: 0.3-15000Hz
Installation resonant frequency: 27kHz
Paranoid voltage: 8-12V
Lateral sensitivity: ≤ 5%; Typical ≤ 3%
Power supply mode: DC18-30V
Typical value: DC24V 4mA
Impact resistance: 2000g
Dynamic range: ± 50g
Nonlinear: ≤ 1%
Temperature range: -40~+120 Installation thread size: M5 mm
Weight: 30gm
Installation torque: about 20-30Kgf.cm (M5 pattern) Output impedance: ≤ 100 Ω
Piezoelectric material: piezoelectric ceramic
Shell material: stainless steel
Output method: Side end outgoing line
-----------------------------------------------------------
Attachment: 1. Sensor Qualification Certificate (with frequency response curve attached)
2. One 1.5-meter standard output cable
3. One M5 connecting bolt
4. One product packaging box
