RC6000 series accelerometer sensor

The RC6000 series piezoelectric accelerometer (hereinafter referred to as accelerometer) can be widely used for vibration and impact measurement in aerospace, national defense and military industry, metallurgical machinery, vehicle transportation, bridges and ships, civil engineering and construction, teaching experiments, and other fields. It has the advantages of wide frequency response, high sensitivity, low lateral sensitivity, and strong resistance to external interference. An accelerometer consists of a base, a mass block, a sensing element, and a housing. The function of an accelerometer is to be paired with a charge amplifier to accurately restore the measured signal.

detailed description

model sensitivity frequency responseHzrange Installation method weight Purpose and characteristics

RC6050T 50mV/g 0.3~9000 100g M5 25/31gram Universal vibration measurementL5top

RC6050T-T 50mV/g 0.5-5000 100g M5 31gram Industrial vibration measurementTNCjoint

RC6050T-J 50mV/g 0.5-10000 100g M5 32gram Industrial vibration measurement and ground insulation

RC6050S 50mV/g 0.3-7000 100g M5 25/31gram Universal vibration measurement, side endL5

RC6100T 100mV/g 0.3~8000 50g M5 3 1gram Universal vibration measurementL5top

RC6100T-J 100mV/g 0.5～7500 50g M5 35gram Industrial vibration measurement and ground insulation

RC6100T-T 100mV/g 0.5～5000 50g M5 35gram Industrial vibration measurementTNCjoint

RC6100S 100mV/g 0.3~8500 50g M5 32gram Universal vibration measurement, side endL5

RC6500T 500mV/g 0.3~6500 10g M5 35gram smallgValue measurement vibrationL5top

RC6500T-J 500mV/g 0.5~6000 10g M5 38gram Insulation, low frequencygvibration measurement

RC6500T-T 500mV/g 0.5~5500 10g M5 38gram Industrial vibration measurementTNCjoint

RC6500S 500mV/g 0.5~6000 10g M5 35gram Low frequency smallgvibration measurement

RC6000T 1000mV/g 0.3~2000 5g M5 35gram ultra-smallgValue measurement vibration

RC6000T-J 1000mV/g 0.3～15005g M5 38gram Insulation, low frequencygvibration measurement

RC6000S 1000mV/g 0.3～10005g M5 35gram Small side endgvibration measurement

Note:

1. After the sensor model, T indicates that the output connector of the sensor is in the form of TNC, and the default output is L5.

2. After the sensor model, J indicates that the sensor is an insulated sensor.

The output connector is either TNC or L5; the corresponding frequency response is 5000Hz or 12000Hz, respectively.

3. After the sensor model, S indicates that the sensor is a side end output.

4. The standard configuration of the sensor is:

① RC6000 series sensors come standard with a 1.5-meter cable and one M5 connecting screw per sensor.

② Imported sensors come standard with output connectors and one imperial connecting screw.

5. Other technical parameters of the sensor:

① Linear: ≤ 1%

② Horizontal sensitivity: ≤ 5%; Typical value ≤ 3%

③ Output bias voltage: 8~12VDC

④ Excitation voltage: 18-30VDC Typical value: 24VDC

⑤ Constant current: 2-10mA; Typical value: 4mA