Puda RT600 chamber type/water-cooled precision temperature control table

The Puda RT600 series hot table is mainly used as an instrument for research, analysis, and observation in various disciplines (chemistry, biophysics, medicine, polymers, liquid crystals, veterinary medicine, petrochemicals, metrology, geology, electronics, food science, fluid inclusions, pharmacy, metallurgy, materials science, ceramics, physics, dentistry, thermal analysis).

This series of hot tables can be used in conjunction with optical or electron microscopes to observe the state and various organizational changes of the sample during the melting, sublimation, crystallization process at the microscopic level.

This series of hot tables has a novel structure, advanced technology, and standardized design and production. Easy to operate and stable in performance. The micro mirror hot stage includes high temperature hot stage, medium temperature hot stage, flat and vertical dual-purpose hot stage, cold and hot stage, culture dish hot stage, etc.

1、 RT600Medium temperature heating table

1. Main data

⑴.Heating element form, temperature range, observation window to sample distance from heating table (platform)

Heating element (sample chamber)

⑵.Observation window: φ12mm; Transparent hole: φ2.5mm(Applicable to transmitted light)

⑶.Temperature measurement: thermocouple

⑷.Maximum heating rate:80℃/min

⑸. Temperature display accuracy:0.1℃

⑹.Temperature display stability:0.3℃

⑺. Experimental environment: The chamber is sealed and can provide a protective atmosphere

⑻.Cooling method: circulating water cooling

⑼.Hot table body size: ≈95×95×28（mm）(Excluding connectors, etc.)

(10) Weight: ≈1kg

Note: The heating element can be configured according to specific experimental conditions.

2. Supporting components: circulating water pump, hot table temperature controller and temperature control software, foil maker, etc.

3. Note: For samples that are prone to thermal oxidation, a vacuum system should be used in conjunction with a protective atmosphere for experimentation.

2、 Hot table temperature controller

1. Introduction

The hot table temperature controller uses advanced intelligent temperature regulators, adopts fuzzy logic control and PID regulation technology, and has functions such as setting dozens of temperature programs.

2. Main data

⑴.Temperature display: Four digit digital display

⑵.Regulator accuracy:0.15 level

⑶.Input power supply:AC220V±10% 50Hz

⑷.Output power: ≤80W

⑸. External dimensions (width x height x depth))：≈230×110×260（mm）

⑹.Weight: ≈4kg

3、 Hot table temperature control software

1. Introduction

Hot table temperature control softwareThe software is specifically developed based on the characteristics of the hot table usage. Temperature scheduling and real-time control operations can be conveniently performed on a computer through software. The software provides a sample temperature calibration method with hot table operation characteristics.

2. Main data

⑴.Software applicable: Windows XPWin7

⑵.Software size:240MB

⑶.Interface with computer:RS232

⑷.Temperature upper limit limit: adjustable

⑸. Heating rate limit: can be set

⑹.Sample temperature calibration: two-point calibration method

⑺. Temperature setting curve and operating curve: real-time display

4、 Other

1. Other requirements: The focal length of the microscope objective should be greater than the distance from the hot stage window to the sample. The computer host needs to have an RS232 serial port.

The protective atmosphere, gas cylinder, and pressure regulator used in the experiment of easily oxidizable samples shall be prepared by the user in advance,The air outlet is equipped with a pagoda connector, and it is recommended to prepare two - and three eye power cord boards with switches for each socket on site.