HG-3628 Rubber Plastic Extruder

One Product Introduction: This extruder is suitable for mixing, processing, and batching materials such as rubber, engineering plastics, and modified plastics. Can connect to the production line to complete processes such as granulation and bottle blowing. The host adopts a modular design principle, which is easy to disassemble, assemble, and clean. II Characteristics: 1 Heater: Special screw in heater for electric heating molds, with high power, fast thermal conductivity, and long service life; two Temperature sensing rod: using a screw in thermocouple, with sensitive temperature measurement, fast heat sensing, and high accuracy; three Barrel and screw: Made of high hardness and wear-resistant alloy, with extremely strong wear and corrosion resistance. The connection between the screw and the bearing adopts an involute spline form synchronized with international standards, achieving higher working torque and working volume; four Bearing: Adopting imported cylindrical self-aligning bearings, adjustable clearance, capable of withstanding high loads and high rigidity; five Transmission system: Adopting Taiwan imported deceleration and transmission system, it runs smoothly and has low noise; six Safety protection: Equipped with an emergency protection stop device, the machine can be stopped in a timely manner in case of emergency. III Specification parameters: 1 Screw diameter mm: 16, 21, 30, 35, 50 or specified; two Screw length to diameter ratio: 24-50:1. Please specify; three Capacity: 1-200 kg/h, please specify.