HG-1703 Computer Servo Hydraulic Material Testing Machine

one.Product Description:

This machine is specially designed for tensile testing of longer test materials such as wires, cables, bamboo bars, steel cables, steel wires, steel cables, iron chains, chains, springs, webbing, ropes, metal fasteners, etc.

two.Specifications and parameters:

three.Software Function Introduction:

1. based onWindowsA luxurious and user-friendly interface testing software under the operating system, with free setting programs for fixed speed, positioning displacement, fixed load, fixed load rate, fixed stress rate, fixed stress rate, fixed strain, stress rate, strain rate, and infinite combinations of multi-stage control modes, such as displacement>=, displacement<=, load>=, load<=, yield point, breakpoint ratio, stress>=, stress<=, strain>=, strain<=, cyclic control, etc;

2. Randomly switch between multiple languages: Simplified Chinese, Traditional Chinese, English;

3. Configurable10User permissions and password management, used to distinguish different users who log in to the testing software and display different functions. An administrator can be freely set to control all debugging and setting functions;

4. powerToneTheKgThegTheKnTheNTheLb, displacementmmThecmTheinchThe units can be randomly switched, and the virtual dial for stress and strain can dynamically display the rate of change in stress and strain;

5. The data zeroing function allows for individual zeroing of force, displacement, and deformation, as well as simultaneous zeroing of force, displacement, and deformation;

6. During the testing process, various curves and loads can be randomly switched and displayed-Displacement and load-Time and displacement-Time and stress-Strain and load-Two point extension, etc;

7. Modular design of test standard editor with one-time input and permanent calling: providing users with the freedom to set the required test standards for the application. The architecture of the test standards is fully developed without industry limitations, covering metal, non-metal, special materials, and finished productsGBTheASTMTheDINTheJISTheBS…Waiting for testing standards;

8. Modular design of the sample data editor, with a one-time input permanent call: providing users with the freedom to set their needs. The modular design of the sample data formula editor allows users to freely add, modify, and delete formulas required for various tests to meet the calculation requirements of different tests;

9. Professional level report editor: simple and flexibleWORDA simple and easy-to-use report editor that allows customers to easily edit and print various reports according to their preferences. The program has a built-in dual report editor that fully allows users to freely edit various reports, allowing testers to choose their preferred report format (the testing program has added a built-in report editor)EXCELThe report editing function expands the previous pattern of single professional reports;

10. The software has a dual correction system for force and displacement: automatic calibration, zero point and magnification software adjustment are very convenient, and the entire process is automatically graded in a concise manner. With the use of multiple force sensors in the force linear dual correction system, the calibration data is automatically recognized and imported;

11. One calibration permanent memory, the memory data is automatically stored in the sensor connector, automatically recognized when replacing the force sensor, without the need for setting or calibration; Calibration data can also be stored on any disk of the computer, and can be imported at any time when the computer malfunctions or the system is reinstalled;

12. All debugging and calibration data, previous test results, different testing methods set or edited by customers, etc. can be freely stored on any disk of the computer. When the computer malfunctions, reinstalls the system, or accidentally deletes or modifies debugging and setting data, backup data can be imported at any time. Repair can be completed without the service of our company personnel, saving time, effort, and cost; The software has overload protection function: overload protection load value, breakpoint ratio value, displacement limit value can be freely set by customers;

13. graphics3DTransform, compare multiple test results in graphical view, freely transform coordinate display, freely scale various test curves to reanalyze and recalculate test results, use hysteresis loop method and stepwise approximation method to obtain non proportional extension strength, load sampling point, displacement sampling point setting, peeling interval setting, etc;

14. At the end of the test, it can be automatically or manually archived. After the test is completed, the maximum strength, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum and minimum values of the peeling interval, average value, etc. can be automatically calculated;

15. Powerful test result data analysis function: In addition to capturing and calculating various parameters of the test curve obtained from general single order control, it can also capture and calculate various order parameters of the curve obtained from special multi-stage control, and can be freely set and calculated;

16. The test results are acceptableEXCELOutput data in formats such as, etc;

17. It can perform data analysis on test results under a unified batch number, print reports, and freely select and combine test results from different batch numbers for data analysis;

18. The query function for printing historical test results in reports: it can be queried separately based on the test date, test information, and test results, and the logical combination of the three can also be used for the query and statistical function of historical test results;

19. The software has the function of demonstrating historical test data: increasing the reproducibility of mistakenly deleted test results;

20. The software has password locking function, which can be used to distinguish the permissions of different users.