FT35-11-5 FRP Axial Flow Fan Low Noise Wall Exhaust Fan

NegotiableUpdate on 01/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

FT35-11-5 FRP Axial Flow Fan Low Noise Wall Exhaust Fan is made of FRP material and is used to transport corrosive gases.

Product Details

　　FT35-11-5 FRP Axial Flow Fan Low Noise Wall Exhaust Fan

FT35-11-5 fiberglass axial flow fan low-noise wall exhaust fan installation precautions

① Before installation, it is necessary to carefully check whether the ventilation fan has been damaged or deformed due to packaging and transportation. If there is any damage or deformation, it should be repaired before installation can proceed.

② During installation, it is important to check for any looseness in the connecting parts. The gap between the blades and the air duct should be even and not scratched or bumped.

③ The weight of the pipeline connecting the air outlet should not be borne by the air duct of the fan, and additional support should be added during installation.

④ A collector must be installed at the inlet of the ventilation fan, and if possible, a protective wire mesh should be installed.

⑤ The fan base must be naturally connected to the foundation plane, and it is not allowed to forcefully connect the base by knocking it to prevent deformation of the base. During installation, the base should be calibrated, iron pads should be added, the basic horizontal position should be maintained, and then the anchor bolts should be tightened.

⑥ After installation, it is necessary to conduct a test and wait for normal operation before it can be officially used.

Maintenance and upkeep:

Users should do a good job in daily maintenance and upkeep of the fan to ensure its normal and safe use. It is recommended to pay attention to checking:

1. Is the air flowing through the fan clean and dry, without impurities or excessive water vapor.

2. When the fan is idle for a long time and reused, it must be checked whether the connecting parts are firm and reliable, whether the rotation is flexible, and tested before it can be officially used.

3. Pay attention to whether there is any abnormal sound or increased vibration during the operation of the fan in daily life. If any abnormal situation is found, stop the machine for maintenance in a timely manner.

4. The dust and dirt on the fan blades should be cleaned in a timely manner.