DR-6000A electronic universal testing machine -300KN

1、 Equipment Overview:

DR-6000A seriesElectronic universal testing machine (servo controlled material testing machine) floor standingThis model adopts a single space structure, with the test space located in the lower space. It is suitable for testing the mechanical properties of various metal and non-metal materials with a test load of ≤ 300kN, such as tension, compression, bending, shear, tearing, peeling, and puncture. It can also perform automatic control tests for constant velocity loading, constant velocity deformation, and constant velocity displacement, and has three closed-loop control modes for low cycle load cycle, deformation cycle, and displacement cycle control.

Obtain indicators such as elongation, tensile strength, bending modulus, elastic modulus, yield strength, net energy, folding energy, total energy, etc., and conduct tests and provide data according to international standards such as GB, ISO, DIN, ASTM, JIS, DIN, etc.

Driven by a servo motor, it has high rigidity, high precision, and high transmission efficiency. The ball screw is driven by a planetary reduction system to achieve the experimental loading process. This machine adopts an advanced DSP+MCU fully digital closed-loop control system for control and measurement. The computer is used for dynamic display of the test process and test curves, and data processing is carried out. After the test is completed, the data can be reanalyzed through graphical module processing to achieve secondary editing. Excel data export and printing of test reports are available, and the product performance has reached the international advanced level.

2、 Curve category:

Load vs. displacement, load vs. time, displacement vs. time, stress vs. strain, stress vs. time, deformation vs. time, slope vs. load, slope vs. deformation, modulus vs. load, modulus vs. deformation, load vs. deformation, simultaneous display of multiple graphs, etc.

3、 Compliant with standards:
1Manufactured according to the standards of GB/T2611 "General Technical Conditions for Testing Machines" and GB/T 16491-2008 "Electronic Universal Testing Machines";

2According to GB/T12160 "Provisions for extensometers for uniaxial testing" and GB/T16825 "Inspection of tensile testing machines" for calibration and acceptance;

3Applicable standards: Applicable to international standards such as ASTM, DIN, ISO, JIS, BS, etc.

4、 Standard configuration:
1 set of stretching fixtures;

5、 Optional device:
Small deformation (electronic extensometer), large deformation (rotary or fixed), high and low temperature chambers, fixtures or specially designed fixtures and accessories can be selected according to the provided test standards or test specimens, and the cost will be calculated separately.

6、 Technical parameters: