-
Phone
132-1882-9799
-
Address
East side of Xindu North Road, Jiangdu District, Yangzhou City, Jiangsu Province
Product Categories
Yangzhou Derui Instrument Equipment Co., Ltd
DR-300 digital density meter
NegotiableUpdate on 08/05
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1、 Equipment Overview: DR-300 Digital Density Meter, suitable for density measurement in rubber, plastic, wire and cable, tire, glass products, hard alloy, chemical solutions, modern energy, petroleum fuel, fine chemicals, chemical reagents, chemical research laboratories, new materials research laboratories, and other fields such as quality management, formula formulation, cost control, and density research
Product Details
1、 Equipment Overview:
The DR-300 digital density meter is suitable for density measurement in rubber, plastic, wire and cable, tires, glass products, hard alloys, chemical solutions, modern energy, petroleum fuels, fine chemicals, chemical reagents, chemical research laboratories, new materials research laboratories, and other fields such as quality management, formula formulation, cost control, and density research.
2、 Compliant with standards:
ASTM D792、 ASTM D297、
GB/T1033、GB/T2951、 GB/T3850、 GB/T533、 HG4-1468、 JIS K6268、 ISO 2781、ISO 1183
|
、 GB/T 611 、GB/T11540、GB/T12206、GB/T5518 |
3、 Technical parameters: |
model |
|
DR-300 |
DR-600 |
Weighing range |
|
0.005~300g |
0.005~600gdensity accuracy |
|
|
0.001 g |
/cm33 |
|
|
Density range |
0.001~99.999g/cmMeasurement typeDensity of any solid form - rubber products, plastic products, metal products |
|
|
plastics |
Products such as granules, films, floats, powders, sealing rings, foams, viscous substances, fasteners, pipes, sheets, glass, etc. |
|
|
measuring principle |
Archimedes' principle |
|
|
Time |
About 5 seconds |
|
|
Memory mode |
Two step memory method |
|
|
Specific gravity measuring frame |
Integrated Injection Molding Professional Specific Gravity Measurement Rack (Size: Length 17.6 mm x Width 10.5 mm) |
|
|
Mm x height 11.1mm) |
Measuring sink |
|
|
Integrated injection molding professional transparent sink (size: length 16.9mm x width 9.8) |
Mm x height 8.3mm) |
|
|
The results show |
Density, volume, and percentage of content |
|
|
Parameter setting |
Water temperature setting, measurement medium density setting, and density setting of primary and secondary materials of the substanceCorrection method |
|
|
The function of single key automatic calibration and automatic detection |
OutputRS-232C |
|
|
Standard communication interface, convenient for testing data output and printing |
Standard accessory① |
|
|
Host, ② sink, ③ measuring table, ④ tweezers, ⑤ thermometer, ⑥ weights, ⑦ windproof and dustproof cover, ⑧ one set of particle measuring accessories, ⑨ one set of float measuring accessories, ⑩ one power transformer |
optional accessories |
|
