-
E-mail
lm@chinalemar.com
-
Phone
18136711288
-
Address
No. 11, Jinhua Road, West the Taihu Lake Lake, Wujin District, Changzhou City
Product Categories
Changzhou Lima Drying Technology Co., Ltd
1870kg/h spray drying tower
NegotiableUpdate on 01/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1870kg/h spray drying tower $n $n Water evaporation capacity: 1870kg/h, inlet air temperature 230 ℃, outlet air temperature 120 ℃, wet material solid content 40%, dry product water content 4%. The $n $n feeding system is equipped with a high-quality pump of 18.5kw, a pressure relief tank, and an overpressure automatic reflux device. The $n $n intake air adopts primary and medium efficiency air filtration. The heating adopts a two-stage series connection of steam heater and gas hot air stove. The diameter of the main tower is designed by the supplier, and the height of the tower top from the ground does not exceed 37 meters. The inner liner material is 304.
Product Details
1870kg/h spray drying tower
Water evaporation rate: 1870kg/h, inlet temperature of 230 ℃, outlet temperature of 120 ℃, solid content of wet material 40%, and moisture content of dry product 4%.
The feeding system is equipped with a high-quality pump of 18.5kw, a pressure relief tank, and an overpressure automatic reflux device.
The air intake adopts primary and medium efficiency air filtration. The heating adopts a two-stage series connection of steam heater and gas hot air stove.
The diameter of the main tower is designed by the supplier, and the height of the top of the main tower from the ground does not exceed 37 meters. The inner lining material is 304.
Two cyclones and bag filters are used for material collection, and a waste heat recovery device is installed after the bag filter. The waste heat recovery device is an efficient heat exchanger made of 304 material with a heat recovery rate of 47-50%.
The system is equipped with one 75kw air supply fan and one 160kw induced draft fan. A cooling air supply system is required for dry products, but the air supply system includes a freeze dehumidifier. The final material needs to reach a temperature close to room temperature. The final material enters two silos and can be switched.
The system control adopts high-quality PLC and is equipped with a touch screen. The contact between equipment materials and materials is SUS304.
The heater, hot air duct, main tower, bag filter, and waste heat recovery device need to be insulated, and the insulation outer layer is made of SUS304. The system control adopts high-quality PLC and is equipped with a touch screen. The contact between equipment materials and materials is SUS304.
The heater, hot air duct, main tower, bag filter, and waste heat recovery device need to be insulated, and the insulation outer layer is made of SUS304.
Similar Product Recommend
