XRW-300C3 Thermal Deformation and Vicat Softening Point Temperature Tester

XRW-300C3Thermal deformation and Vicat softening point temperature tester

Function and scope of application:

Mainly used for measuring the thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastics, hard rubber, nylon, electrical insulation materials, long fiber reinforced composite materials, and high-strength thermosetting laminates. Easy to operate and accurately controlled, it is a highly intelligent testing instrument widely used in colleges, research institutions, and product quality supervision and inspection units.

adoptPCMachine control, displacement sensor to measure deformation, real-time curve drawing, directly inPCSecondary processing of test data on board, which can be imported intoOFFICEIn the software, edit and layout.

Execution standard:

comply withGB/T 1633TheGB/T 1634TheGB/T 8802TheISO 2507TheISO 75TheISO 306TheASTMD 1525,

ASTMD 648Waiting for standard requirements.

XRW-300C3Thermal deformation and Vicat softening point temperature testerTechnical Specifications：

1）Temperature control range: room temperature~300℃

2）Large temperature error: ±0.5℃

3）Heating rate: 30 ℃/h--120℃/h

4）Temperature measurement point:3a

5）Deformation measurement range:-1mm～10mm

6）Large deformation error: ±0.001mm

7）Medium used: Methyl silicone oil(customer-supplied)；

8）Sample support span:64mmThe100mm

9）Cooling method:150Natural cooling above ℃,150Cooling with water below ℃ or natural cooling;

10）Equipped with upper limit temperature protection function;

11）Number of test racks:3a

12）The control method adopts single-chip microcomputer andPCMachine distributed control system;

13)Instrument size:880mm×580mm×750mm

14）Required space: front and back1m， 左右0.6m

15)Power Supply:4500VA 220VAC 50HZ

configuration

1）Host a

2）Sample rack 3a

3）Hot deformation pressure head 3a

4）Vika pressure needle 3a

5）Brand desktop computer a

6）Color inkjet printer a

7) Based onWIN982000XPOne set of experimental software in Chinese version

8）Power cord a

9）Signal line a

Weight:

Supporting equipment:

Profile prototype:XXZ-II profile prototype

XXZ-IIProfile prototypeProduct Overview:

XXZ-II profile prototype is a device that uses mechanical processing methods to prepare various non-metallic material samples; Mainly used for cutting and cutting plastic sheets, pipes, profiles, and producing long strip samples. This equipment is essential for research institutes, universities, quality inspection units, and production plants.
Technical parameters of XXZ-II profile prototype:
Saw blade speed: 4000r/min Saw blade diameter: φ 250mm
Blade thickness: 3mm Blade cutting height: 45mm
Cutting stroke: 260mm pipe with a large outer diameter less than or equal to 315mm
The wall thickness of the pipe is less than 30mm, and the cutting width of the pipe is less than or equal to 150mm
Workbench dimensions: length x width=570mm x 460mm

Experimental oil bath silicone oil: Methyl silicone oil100CS 20L