Introduction to Waters ACQUITY UPLC High Performance Liquid Chromatography:

System Features

stable speed
Small particle packed chromatography columns can improve analysis speed without reducing separation efficiency
Increase sample throughput, improve work efficiency, and reduce analysis costs
Save time on the development and certification of previously time-consuming methods
Stable sensitivity
Small particle technology and integrated instrument design,UPLC™ Can improve sensitivity while maintaining separation
High column efficiency and narrower chromatographic peaks mean high chromatographic peak height and sensitivity
Stable sensitivity can be achieved while obtaining stable separation degree and stable speed
Stable separation degree
Utilize small particle fillers（1.7ML）Obtain strong separation ability
Low diffusion volume, fully utilizing the separation ability of small particle fillers

Stable separation degree, suitable for separation analysis of complex mixtures

To meet the growing demand for historical tracking in chromatography laboratories, eachACQUITY UPLC™ Each chromatographic column is sold with oneeCord™， It can record the number of injections, high back pressure, and column temperature.

Main parameters

●High performance liquid chromatographySystem, binary solvent management system, pressure resistance 15000psi

The injection cycle is very short, with a strong wash/weak wash design to reduce cross contamination

● Delay volume of the entire system:<400 uL

● Integrated leakage management: standard leakage sensor, stable leakage treatment device

Quantitative synchronization: Injection synchronization between the pump and sample manager improves the reproducibility of retention time

Flow rate range: 0.010~2.000 mL/min, step by step at a rate of 0.001 mL

● Operating pressure: 15000 psi up to 1 uL/min, 9000 psi up to 2 mL/min

● pH range: 2~12

Non interfering operation: Leakage sensor, with 96 hour complete diagnostic data display through a software

Injection cycle time:<30 seconds

The temperature in the sample room is controlled between 4 ℃ and 40 ℃

● Can configure all optical detectors and different MS detectors

● Compatible with third-party MS