Shimadzu High Performance Liquid Chromatography Prominence LC-20A

characteristic:

• Networking - Providing Solutions for Analysts

• Stable performance - meeting customer requirements for instruments

• Automation - Stability wins the trust of customers

Main parameters:

• System Controller Prominence CBM-20A/20Alite

  >> CBM-20A
  Connectable units: 4 more infusion units, 1 automatic sampler, 1 column temperature box, 2 more detectors, 1 fraction collector, and 2 more auxiliary controllers
  Number of connection units: 8 (can be increased to 12)
  Data buffering: Approximately every 24 hours for analysis (at a sampling rate of 500ms, limited to LCsolution use only)

  >> CBM-20Alite
  Connectable units: 4 more infusion units, 1 automatic sampler (excluding SIL-10AF/10AP/10A), 1 column temperature box, 2 more detectors, and 2 more auxiliary controllers
  Number of connection units: 5
  Data buffering: Approximately every 24 hours for analysis (at a sampling rate of 500ms, limited to LCsolution use only)

• Infusion unit Prominence LC-20AD/20AT/20AB

  >> LC-20AD
  Infusion method: Parallel double plunger
  Piston capacity: 10 μ L
  Large discharge pressure: 40MPa
  Flow setting range: 0.0001mL/min-10.0000mL/min
  Flow accuracy: within 1% or 2 μ L/min, whichever is greater
  Flow accuracy: 0.06% RSD or 0.02minSD, within the larger value

  >> LC-20AT
  Infusion method: Series double plunger
  Piston capacity: Main pump head 47 μ L, auxiliary pump head 23 μ L
  Large discharge pressure: 40MPa
  Flow setting range: 0.001mL/min-10.000mL/min
  Flow accuracy: within 2% or 2 μ L/min, whichever is greater
  Flow accuracy: 0.06% RSD or 0.02minSD, within the larger value

  >> LC-20AB
  Infusion method: Parallel double plunger (Type 2)
  Piston capacity: 10 μ L
  Large discharge pressure: 40MPa
  Flow setting range: 0.0001mL/min-10.0000mL/min
  Flow accuracy: within 1% or 2 μ L/min, whichever is greater
  Flow accuracy: 0.06% RSD or 0.02minSD, within the larger value

• 
  

  Gradient system of infusion unit

  >> LC-20AB
  Gradient method: high-pressure mixing
  Number of mixed solvents: 2 liquids

  >>LC-20AD/20AT High Voltage GE Specification
  Gradient method: high-pressure mixing
  Number of mixed solvents: 2 or 3 liquids

  >>LC-20AD/20AT Low Voltage GE Specification
  Gradient method: low-pressure mixing
  Number of mixed solvents: 4 more liquids

• UV Visible Detector
  >>Prominence SPD-20A/20AV UV-VIS detector
  

  SPD-20A/SPD-20AV
  Light source: SPD-20A D2 light, SPD-20AV D2 light, W light
  Wavelength range: SPD-20A 190nm-700nm, SPD-20AV 190nm-900nm
  Wavelength accuracy: below 1nm
  Wavelength accuracy: below 0.1nm
  Noise: ± 0.25 × 10-5AU
  Drift: ± 0.5 × 10-4AU/h
  Linear:>2.5AU
  Function: Dual wavelength detection at 190nm-370nm or above, proportional chromatogram output, wavelength scanning, time program

• 
  

  >>Prominence SPD-M20A PDA detector

  SPD-M20A
  Light source: D2 lamp, W lamp
  Number of diode components: 512
  Wavelength range: 190nm-800nm
  Wavelength accuracy: below 1nm
  Wavelength accuracy: below 0.1nm
  Noise: ± 0.3 × 10-5AU
  Drift: 0.5 × 10-3AU/h
  Linear:>2.0AU
  Function: Contour line output, spectral retrieval, large output

• Prominence SIL-20A/20AC automatic sampler

  Injection method: full volume injection, variable injection volume
  Injection volume setting range: 0.1 μ L-100 μ L (standard), 1 μ L-2000 μ L (optional)
  Sample processing quantity:
  175 (1mL sample bottle)
  105 (1.5mL sample bottle) SIL-20AC 70 (1.5mL sample bottle)
  50 (4mL sample bottle)
  192 (96 hole MTP 2 pieces)
  768 (384 hole MTP 2 pieces)
  In addition to the above specifications, an additional 10 1.5mL sample bottles can be used
  Injection volume accuracy: less than 1%
  Injection volume accuracy: below 0.2% RSD
  Cross contamination: typical value below 0.0025% (naphthalene, chlorhexidine)
  Repeated injection times: 30/1 sample
  Needle cleaning: set arbitrarily before and after injection
  Sample cooler: SIL-20A without SIL-20AC module cooling and heating method, with moisture removal function at 4 ℃ -40 ℃

• Sample rack switcher

  >>Sample rack switcher C
  Applicable plates: 96 well MTP, 96 well DWP, 384 well MTP, 384 well DWP, 1.5mL sample bottles (54 pieces)
  Number of board processing blocks: 12P
  Sample cooler: module cooling and heating method, with moisture removal function at 4 ℃ -40 ℃

• Column temperature box Prominence CTO-20A/20AC

  Temperature regulation method: forced air circulation type
  Cooling method: CTO-20A None, CTO-20AC Electronic Cooling
  Temperature control accuracy: below 0.1 ℃ (typical value below 0.04 ℃)
  Temperature control range: CTO-20A (room temperature+10) ℃ -85 ℃, CTO-20AC (room temperature -10) ℃ -85 ℃
  Storage space: W220 × H365 × D95mm
  Can accommodate instruments: 2 manual samplers, gradient mixers, 2 high-pressure flow path switching valves, etc
  Timer program: Linear temperature program
  Stability measures: solvent sensor, temperature fuse, upper limit temperature control