-
E-mail
sales@victorMeter.com 1991095757@qq.com
- Phone
-
Address
Building 9, Optoelectronic Industry Park, Wuling South Road, Taizhou Medical High tech Zone, Jiangsu Province
Product Categories
Taizhou Kotuo Instrument Equipment Co., Ltd
WKT-R-50ZS Near Infrared Online Moisture Tester
NegotiableUpdate on 04/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The WKT-R-50ZS near-infrared online moisture analyzer from Weike Meituo brand is applied to all industries that require rapid moisture measurement. It can perform online detection of raw materials such as chemical raw materials, steel, sintering, coal, grains, woodworking sawdust, etc.
Product Details
Product Details
detailed parameters
|
model:
|
WKT-R-50ZS
|
|||
|
measuring range：
|
1-50% (no water seepage in the material)
|
|||
|
display resolution：
|
0.01%
|
|||
|
measurement accuracy：
|
± 0.2-- ± 0.5% (different material textures have an impact)
|
|||
|
measurement channel：
|
100
|
|||
|
Height range：
|
250mm±100mm
|
|||
|
ambient temperature：
|
0-50℃
|
|||
|
ambient humidity：
|
5-90%
|
|||
|
repeatability：
|
300, 600, 1200, 2400, 4800, 9600
|
|||
|
response time：
|
2-60 seconds
|
|||
|
filter range：
|
0-2.5%
|
|||
|
Using power supply:
|
Voltage 220V, frequency 50HZ
|
|||
|
Power consumption：
|
100W
|
|||
|
light interference：
|
Not affected by changes in external ambient light, the probe does not require a light shield
|
|||
Product Features
Vicometo brandWKT-R-50ZS near-infrared onlineMoisture analyzer is applied to all industries that require rapid measurement of moisture, and can be used for chemical raw materials、Steel, sintering, coalOnline testing of raw materials such as grains, wood chips, etc.
precautions
For the safe use of this instrument, please be sure to follow the following safety precautions during operation, maintenance, and repair.
1. Power supply: Confirm that the power supply is consistent with the required power supply for this instrument before supplying power to this instrument;
2. Power supply requirements: The power supply of this instrument should be equipped with an AC voltage regulator;
3. Protective grounding: To prevent electric shock, it is necessary to implement protective grounding before putting this instrument into use;
4. The necessity of protective grounding: Please do not cut or remove the protective grounding wires inside or outside this instrument, as doing so will pose great danger to the human body;
5. External wiring: After accurately connecting the protective grounding, connect the cables between the various components of the instrument;
6. Instrument maintenance and upkeep: This instrument has high voltage circuits inside, and hands must not be inserted into its interior when the instrument is powered on;
7. Replacing parts: When replacing instrument fuses and transformers, turning off the power switch of the host cannot guarantee complete power cut-off. Therefore, please make sure to confirm that the main power has been cut off;
8. Power interface: The two 3-core cables at the bottom of the host casing are power interfaces for the host and probe, with a high voltage of 220V. Do not disassemble the instrument when it is powered on.
Similar Product Recommend
