Vegetable dryer

NegotiableUpdate on 01/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The complete drying process of vegetable dryer has a high degree of automation. The interior of the equipment is made of stainless steel and the surface is polished and passivated. External surface spraying treatment to maintain the cleanliness of the equipment surface.

Product Details

1Vegetable dryerAccording to the properties of the material itself, it contains high molecular weight organic compounds such as sugar, vitamins, and trace elements. During the drying process, the nutritional components cannot be destroyed. For fruit drying parameters, a production process of medium low temperature drying is adopted. Based on comprehensive analysis of equipment performance and drying form, a belt drying unit is adopted.

2. Technical Description of Drying Machine:

A dryer is a commonly used drying equipment. The material is evenly spread through the elevator feeder and then enters the dryer. Hot air passes through the middle and surface of the dried material, and after heat exchange in the steam heat exchanger, the hot air evaporates the moisture of the material. The dry moisture is discharged from the upper part of the main body to the outside, keeping the workshop air clean, and the temperature of the hot air can be controlled.

In response to the characteristics of organic matter dehydration and drying, it is required to use medium high temperature and high wind speed drying to ensure that the cellulose, vitamins, minerals, fresh active cells, and cell walls in fresh plants are not damaged, in order to ensure product quality and maintain fresh cell activity.

Due to the high moisture content and large dehumidification capacity of dry materials, a separate dehumidification fan is used. The discharged moisture can be treated centrally.

　　Vegetable dryerThe complete drying process has a high degree of automation, with stainless steel production inside the equipment and surface polishing and passivation treatment. External surface spraying treatment to maintain the cleanliness of the equipment surface.

Our company has made significant improvements to the original dryer based on our years of production experience in the pharmaceutical, food, and other industries, as well as the equipment requirements of these industries. It mainly has the following characteristics:

(1) Hot air crosses the material from bottom to top and from top to bottom, increasing the contact area between the material and hot air and improving the drying speed.

(2) The material of the entire equipment is made of all stainless steel that meets the requirements of pharmaceuticals and food. The bottom of the inner cavity is fully welded with excessive rounded corners, ensuring that there is no air leakage between the machine and the outside during operation, and ensuring easy cleaning of the equipment. There is no water accumulation inside the equipment, ensuring the cleanliness of the dried items every time. Make production comply with food hygiene requirements.

(3) Adopting a fully enclosed structure, there are no external air ducts except for the dehumidification duct, ensuring that materials are not contaminated, improving thermal efficiency, and enhancing working conditions.

(4) The internal air supply device using * not only increases the relative velocity between the material and the hot air, improves the drying speed, but also ensures uniform and consistent drying of the material.

(5) The heating device is placed separately on the side and a specially designed filter is installed at the inlet and outlet of the heater, which not only filters out fine powder and debris in the circulating air, but also ensures the cleanliness of the inside of the heater; The drying section of the unit is equipped with several units, each of which can be independently controlled through a shut-off valve, greatly improving the operability of the equipment.

(6) All key components are made of domestic and manufacturer products to ensure long-term normal operation of the equipment.

(7) All air inlets are equipped with medium efficiency filters to ensure clean air intake.

(8) All circulating fans are centrifugal fans, which have low energy consumption, high pressure head, and high hot air penetration rate.

(9) Mesh belt width: 1200mm

(10) Equipment dimensions: 7500 * 1200 * 2800mm

(11) Transmission motor: 2.2kw * 2 units

(12) Dehumidification fan: 1.5kw * 2 units

(13) Circulating fan: 1.5kw * 3 units