-
E-mail
Amy@ultrainst.com
-
Phone
13437720684
-
Address
Room 807, Unit 2, Building 1, Aotou Oriental Xintiandi Building, Dayawan District, Huizhou City
Huizhou Daya Bay Aite Instrument Co., Ltd
Amy@ultrainst.com
13437720684
Room 807, Unit 2, Building 1, Aotou Oriental Xintiandi Building, Dayawan District, Huizhou City
The TE type low-temperature viscosity tester from Kaineng Instrument Company in the United States uses two-stage or three-stage thermoelectric (semiconductor) refrigeration, with air and water heat exchangers dissipating the heat from the hot end of the cooler into the air. Among them, the TE-3000 model abandons water heat exchangers. Accurate temperature control fully meets the requirements of ASTM D445 for low-temperature determination of kinematic viscosity. The top of the viscosity tester has two circular holes with a diameter of 51 millimeters, which are used to accommodate two glass capillary viscometers. Another small hole is used for thermometers or temperature sensors. The specially designed multi-layer frost free see through window and fluorescent tube provide good visibility inside the bath. TE-1500 model, with the fixed-point temperature control switch on the panel, 8 commonly used temperatures for low-temperature measurement can be directly set; If the sample selection switch is set to "Variable", the temperature can be set at any point within the allowable range. TE-3000 model, microcomputer digital temperature control, target temperature digital input, fast and convenient, measurement accuracy reaches ± 0.01 ℃. Provide options for Fahrenheit and Celsius. Equipped with a startup microcomputer self-test program to achieve self intelligent diagnosis. Abandoning the water heat exchanger, the instrument operates ultra quietly. Specially suitable for periodic calibration of "glass capillary viscometer". Various protective measures are taken to ensure safety and reliable operation of the instrument. Once the built-in overheat relay receives an overtemperature signal, the instrument will automatically cut off all power. If the temperature controlled thermistor is open, the heating and cooling power supply will be automatically cut off. If the coolant flow through the air-water heat exchanger is insufficient, the flow switch will automatically prevent the control circuit from starting (heating or cooling) until the safe flow rate is restored. The cold bath shell is made of thick aluminum plate coated with anti rust resin. The baffle of the cold bath facilitates the circulation of cold liquid and provides a clear background for observing the internal glass capillary viscometer. Instrument specifications:
1. TE-1500 -30℃~+10℃, ±0.02 ℃
Precise solid-state temperature control, easy and fast temperature setting and change.
TE-3000-30 ℃~+30 ℃, ± 0.01 ℃, microcomputer digital temperature control, target temperature digital input, especially suitable for the calibration of "glass capillary viscometer".
Instrument size:
254wide×406deep×533mmhigh
Instrument capacity:
2.5 L
Inner diameter of constant temperature bath:
121wide×83deep×305mmhigh
Observation window size:
95wide×265mmhigh
Place glass capillary tube
Instrument weight:
20.4kg
Heat exchanger size:
305×345×465mm
Weight of heat exchanger:
50.8kg
Power Supply:
240V 50/60Hz