T series large water-cooled three-phase synchronous electric

Stator outer diameter: 990-3250
Power range (KW): 250-20000
Voltage: 6KV/10KV
Protection level: IP00/IP20
Cooling method: IC01
Insulation level: F
Polar number: 4-40
The T series synchronous motor is suitable for driving ventilation fans, water pumps, electric generator sets, and other general machinery. The rated voltage of this series of motors is 6000V, and can be made into 10000V according to user requirements. The rated power factor is 0.9 (lead). The motor allows direct starting at full voltage, and the rotor circuit should be connected in series with a starting resistance that is 10 times the resistance of the magnetic field winding during starting.

The T series synchronous motors all comply with the relevant provisions of the national standard GB755 "Basic Technical Requirements for Rotating Electrical Machines".

The T series synchronous motor has a horizontal structure. The cooling methods include water cooling, self fan cooling, pipe or semi pipe ventilation, and closed self circulating ventilation;

The T series synchronous motor can be made with one end shaft extension or both ends shaft extension. The rotation direction is counterclockwise when viewed from the collector ring end. The rotation direction of the motor can be changed as needed, but the fan blades of the motor should be adjusted accordingly.

TK series air compressor with large AC three-phase synchronous motor

The TK series three-phase synchronous motor is a synchronous motor designed specifically for air compressors, mainly used for equipment in the refrigeration and fertilizer industries. The starting method is full voltage starting. If the user's power grid capacity is insufficient, the voltage can be appropriately reduced for starting.

This series of motors complies with the national standards GB755 "Rotating Electricity: Rating and Performance" and JB/T8667.1-1997 "Technical Conditions for TK Series Three phase Synchronous Motors".