Qichen Instrument Portable Hardness Tester HY-32

Qichen Instrument Portable Hardness Tester HY-32Applicable to:

The HY-32 ultrasonic hardness tester can adapt to any shape and size of workpieces made of fine-grained materials on site. It has been widely used in fields such as electroplating, mechanical processing, automotive parts, aerospace, petrochemicals, heat treatment, molds, bearings, crankshafts, gears, supervision and inspection, and scientific research and teaching, including electroplating layers (such as mirror rollers, chrome plated rollers, corrugated rollers, intaglio plates, piston rods, piston rings, paper dryers, chrome plated parts), nitride layers, carburizing layers, metal sheets or thin films, small parts, and other workpieces that cannot be measured by portable hardness testers

Workpieces that require no damage or indentation on the surface during measurement

Large workpieces that are not easy to move or components that are not easy to disassemble, as well as test pieces with special shapes (such as gear tooth surfaces, crankshafts, etc.)

Qichen Instrument Portable Hardness Tester HY-32characteristic;

★ No damage to the workpiece - no visible indentation on the surface of the workpiece

★ High measurement accuracy - up to ± 1.0 HRC (HRC55-70), or ± 3% HV/HB

★ Fast measurement speed - outputting test results within 1 second, suitable for on-site full inspection of large quantities of products

★ Stable performance - already applied in many large and well-known domestic and foreign enterprises
★ Wide testing range - up to 1700HV

★ Can measure thin workpieces - such as chrome plated, nitrided, carburized surfaces, thin plates, thin-walled tubes, etc

★ Measurable special-shaped parts - no impact force, can measure irregularly shaped workpieces such as gears, crankshafts, and slewing supports

★ Large capacity storage - can automatically store 999 sets of measurement data

★ Wireless Bluetooth Printing - Configurable Micro Bluetooth Printer for On site Printing Test Results

★ USB interface - can be connected to a computer through data software

★ It can adapt to various probes (5N manual probe, 30N manual probe, 10N electric probe, 5N electric probe, Φ 4mm small diameter probe) to meet the measurement requirements of different workpieces.

Technical parameters:

Measurement range: HRC：20-70 HRA：60.5-85.6 HRB：41.0-105.0 HV：20-1740 HB：76-618 HS：34.2-97.3

Tensile strength σ b: 255-2180MPa

Display resolution: When displaying Rockwell hardness, the display resolution is 0.1 HRC

Indication accuracy: Electric probe: ± 1.0 HRC, HV/HB is ± 3%

Manual probe: ± 1.5 HRC, HV/HB is ± 3%+5

Load: 10Nf ± 1Nf

Pressure head specification: 136 ° diamond pressure head

Data storage: 999 sets (5 measurement values per set)

Measurable workpiece small width: 1mm

Measurable workpiece thickness: 1.5mm (5N probe)

Measurable coating thickness: 5um (chrome plating)

Continuous working time: 8 hours (without backlight and printing)

Instrument power supply: 2000mAH 7.4V rechargeable lithium battery or 220V AC power supply

Dimensions: 178 × 84 × 36mm

Probe length: 150mm

Instrument weight (including probe): 400g

Applicable ambient temperature: -10 ℃~50 ℃

Instrument standard configuration:

HY-32 instrument host, 10N manual standard probe (including probe wire), test block, charger, instruction manual, certificate of conformity, warranty card, instrument box

Optional configuration:

10N electric probe, 5N electric probe, 3N electric probe, 5N manual probe, 30N manual probe, Φ 4mm small diameter probe, short probe, Bluetooth printer, data software