PSC-1A organic glass water collector made of plastic upper and lower bottoms

This instrument is suitable for environmental protection and other related departments to collect water samples for water quality or analysis of plankton in water. It can also be used for the collection of aquatic biological samples. It is also suitable for the collection of water quality samples except for bacterial indicators and oils, and complies with the technical specifications of the national "Water and Wastewater Monitoring and Analysis Methods".

PSC-1A organic glass water collector made of plastic upper and lower bottomsMain technical indicators
Sampling capacity: 2.5 L (with scale)
Sampling depth: freely set as needed
Sampling temperature: 0 ℃ -60 ℃
Sampling environment: Water without weeds or other large solid impurities
Sampling method: Connect with a rope and release into the water

PSC-1A organic glass water collector made of plastic upper and lower bottoms Instrument features
1. The sampler consists of high-strength organic glass, two semi-circular upper covers with shafts, a movable bottom plate, and a lead block. It is colorless, transparent, non-toxic, and the instrument has a movable flip cover that automatically opens and closes, enabling the collection of water samples from the desired depth. It is easy to use.

2. The upper cover and lower base are both made of plastic to prevent the sampler from being crushed due to gravity when lowered.

3. The lead block is wrapped in a base and isolated from water and air to prevent oxidation of the lead block due to prolonged exposure to air.
3. Various field sampling, environmental monitoring, water treatment, liquid sampling, and environmental water sampling can be carried out to sample liquids at different depths in layers Easy to carry and suitable for places without power supply

configuration

1. Sampling tool: Organic glass material sampling bucket, capacity 2.5L (with scale), 20-40 meters
2. Portable for easy on-site sampling

Usage:

When using, be sure to clamp the rubber hose at the water outlet first, and then open the two semi-circular covers. Let the water collector sink into the water, and the bottom inlet will automatically open. The depth of sinking should be marked on the mooring line. When the required depth of sinking is reached, the mooring line should be lifted up, and the upper cover and lower water inlet will automatically close. After being lifted out of the water surface, do not touch the bottom to avoid water leakage. Insert the rubber hose from the water outlet into the container mouth, release the iron clamp, and the water sample will be injected into the container.

Changzhou Pusen Electronic Instrument Factory Address: No. 55-2-19, Xihuan 2nd Road, Jintan City
Our factory independently develops and produces various experimental instruments and environmental protection instruments, and can also customize according to customer requirements