PC-3A Ⅱ (PM2.5) Pocket sized Laser Inhalable Dust Tester Manufacturer

NegotiableUpdate on 11/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: The PC-3A II (PM2.5) pocket sized laser inhalable dust tester is used for measuring the concentration of inhalable dust (PM2.5) in the air of public places and the number of dust particles with a particle size of 0.5-2.5 μ m per unit volume of air in clean environments.

Product Details

PC-3A Ⅱ (PM2.5) Pocket sized Laser Inhalable Dust Tester Overview

PC-3A Ⅱ (PM2.5) Pocket sized Laser Inhalable Dust Tester(hereinafter referred to as the pocket dust meter) is used for measuring the concentration of inhalable dust (PM2.5) in the air of public placesThe particle size per unit volume of air in a clean environment is0.5—2.5The number of μ m dust particles. yesThe new generation of intelligent measuring instruments for real-time and rapid measurement of the above items by the Centers for Disease Control and Prevention, health supervision, environmental dust monitoring and other departments.

This instrument is a small pocket sized measuring instrument,Using the light scattering principle of * and semiconductor laser as the measurement light source, high-sensitivity non-contact measurement of dust in the air is carried out. Managed and controlled by a single-chip microprocessor throughout the testing process,Adopting high-resolution large screen high brightness LCD display,Full Chinese display.

This instrument has a small volume,Portable,It has the advantages of fast testing speed, high sensitivity, good stability, light weight, simple operation, and dual-use of AC and DC. Suitable for measurement in situations without external power supply.It can be widely applied in various public places and fields such as electronics, optics, food, aerospace, and aviation.

PC-3A Ⅱ (PM2.5) Pocket sized Laser Inhalable Dust TesterMain technical indicators:

1Measurement range of inhalable dust:0.001~5mg/m³；

2Detection sensitivity:0.001mg/m³；

3. Measure particle size range:0.5—2.5µ m particles;

4. Sampling time: 1 minute;

5. Data storage capacity: 200 sets of data;

6，Work environment: Temperature（0－35℃）

Humidity RH (20-70)%

7. Working power supply: 220V AC power supply;

Equipped with a high-capacity lithium battery, it can be used continuously for more than 2 hours after being fully charged.

10. Volume:105mm×215 mm×50 mm；

11. Weight; About 500g;

Changzhou Pusen Electronic Instrument Factory Address: No. 55-2-19, Xihuan 2nd Road, Jintan City
Our factory independently develops and produces various experimental instruments and environmental protection instruments, and can also customize according to customer requirements

(0): Savings
: ：Www.czpusenyq.com