PC-3A Ⅱ (PM10) Pocket sized Laser Inhalable Dust Continuous Tester *!

NegotiableUpdate on 12/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: The PC-3A II (PM10) pocket sized laser inhalable dust continuous tester adopts the light scattering principle of * and uses semiconductor laser as the measurement light source to perform high-sensitivity non-contact measurement of dust in the air. The entire testing process is managed and controlled by a single-chip microprocessor, and a high-resolution large screen high brightness LCD display is used with full Chinese display.

Product Details

PC-3AⅡType (PM10) Pocket sized Laser Inhalable Dust Continuous Tester Overview:

PC-3AⅡThe pocket sized laser inhalable dust continuous tester (PM10) is used for measuring the concentration of inhalable dust (PM10) in the air of public placesThe particle size per unit volume of air in a clean environment is0.5—5.0The number of μ m dust particles. yesThe new generation of intelligent measuring instruments for real-time and rapid measurement of the above items by the Centers for Disease Control and Prevention, health supervision, environmental dust monitoring and other departments.

This instrument is a small pocket sized measuring instrument,Using the light scattering principle of * and semiconductor laser as the measurement light source, high-sensitivity non-contact measurement of dust in the air is carried out. Managed and controlled by a single-chip microprocessor throughout the testing process,Adopting high-resolution large screen high brightness LCD display,Full Chinese display.

This instrument has the advantages of small size, easy portability, fast testing speed, high sensitivity, good stability, light weight, simple operation, and dual-use of AC and DC. Suitable for measurement in situations without external power supply.It can be widely applied in various public places and fields such as electronics, optics, food, aerospace, and aviation.

PC-3AⅡType (PM10) Pocket sized Laser Inhalable Dust Continuous TesterMain technical indicators:

1Measurement range of inhalable dust:0.001~10mg/m³；

2Detection sensitivity:0.001mg/m³；

3，Measurement particle size range: 0.5— 10µmParticles;

4. Sampling time: 1 minute;

5. Data storage capacity: 200 sets of data;

6，work environment temperature0－35℃）

humidityRH（20－70）％

7. Working power supply: 220V AC power supply;

Equipped with a high-capacity lithium battery, it can be used continuously for more than 2 hours after being fully charged.

10. Volume:105mm×215 mm×50 mm；

11，Weight; About 500g;

Changzhou Pusen Electronic Instrument Factory Address: No. 55-2-19, Xihuan 2nd Road, Jintan City
Our factory independently develops and produces various experimental instruments and environmental protection instruments, and can also customize according to customer requirements

(0): Savings
: ：Www.czpusenyq.com