Imported belt split saw

NegotiableUpdate on 02/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Imported from Germany, the splitting saw has been tested by multiple domestic customers with good splitting effect and stable quality. The imported belt splitting saw can not only meet your production requirements, but also meet the actual production needs of various customers, and comply with domestic pig slaughtering technology requirements. The German imported belt splitting saw adheres to the principle of quality priority, making the equipment more stable and practical.

Product Details

This saw will turn on after pressing the switch located on the rear handle, and will stop running for a short period of time after releasing the switch.

First, turn on the water supply switch before using this saw. This saw can only enter cutting mode in operation. After the cutting is completed, exit the object being cut while maintaining its operating state, then turn off the machine and turn off the water switch.

　　heavywantmatterItem:Nowantpick uptouch锯item

　　Technical Parameters

Weight: 62 kilograms

Length: 1400 millimeters

Cutting depth: 460 millimeters

Power consumption: 1700 watts

Voltage: 380 volts, 50 hertz

Motor: Three phase

Motor protection: IP 65

Recommended balancer: FREUND F55-2

　　Installation

5.1 Power on

Before connecting this saw to the main power supply, please check the technical parameters and power supply of the saw to ensure consistency. The saw must be connected to the main power supply by an electrician, following the wiring diagram in this manual and complying with VDE and local regulations.

Before putting the saw into operation, check the direction of its movement.

5.3 Suspension of Saw

Fix the balancer at a sufficiently high position and equip it with a safety chain, and hang the saw in the working position.Attention: Due to safety reasons, the saw must be used in a suspended state.