High chlorine COD digester (water quality analysis)

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

GL-208GL high chlorine COD digester (water quality analysis) follows the Chinese environmental protection industry standard - determination of chemical oxygen demand for high chlorine wastewater - chlorine gas calibration method. The chemical solution preparation, operation, and COD calculation of the instrument shall comply with HJ/T70-2001.

Product Details

High chlorine COD digester (water quality analysis)

Product characteristics

1. The wavy strip heating wire of the heating plate is a new imported alloy material with a long service life.

2. Microcrystalline panels are capable of withstanding high temperatures up to 800 ℃, with uniform heating on the surface and fast heating and cooling speeds.

3. The heating plate is made of high-temperature resistant and heat-insulating ceramic fiber material, which has low panel heat loss and uniform thermal conductivity.

3. The microcrystalline panel is flat, smooth, and easy to clean. If the surface is contaminated, wipe it dry with a cloth.

4. The glass burr reflux tube has a good digestion reflux effect to ensure the accuracy of sample digestion results.

5. Dual screen digital display digestion time: temperature (between 165 ℃ -330 ℃) and timing can be set at any time.

6. After digestion is complete, the heating will automatically stop and the fan will continue to work for 120 minutes to assist in cooling the sample. It can be left unattended.

High chlorine COD digester (water quality analysis)
Technical Parameter

PRODUCT MODEL	GL-208GL
Execution standards	National Standard HJ/T70-2001
Number of dissolved samples	8 (COD of high chlorine wastewater)
Dissolving bottle capacity	500ml (24 # ground conical bottle)
Dissolve sample quantity	20ml
measuring range	30-700mg/L (chloride concentration less than 20000mg/L)
digestion time	Nitrogen gas supply, digestion for 2 hours (user adjustable)
measurement error	The relative standard deviation of potassium hydrogen phthalate standard solution (500mg/L) shall not exceed 5.0%; The relative standard deviation of industrial organic wastewater (500mg/L) shall not exceed 8.0%;
ambient temperature	Environmental temperature: ≤ 35 ℃
Power	1600W (user adjustable, with temperature display)
heat panel	Microcrystalline glass panel
Instrument dimensions	450mm× 350mm× 650mm