HS600 Enhanced Handheld High Brightness Digital Ultrasonic Flaw Detector

HS600 functional features:
High brightness field display, Chinese function hotkey operation

High performance, safe and environmentally friendly lithium batteries

Module plug-in, one machine, two electricity, two charging

Probe interface: Q9-Q9

Communication method: dedicated serial port

Testing channels: 50 sets, equipped with transverse wave testing, longitudinal wave testing, small angle testing, and surface wave testing

Storage capacity: 1000 frames

Weld seam type: with weld groove type and display defect location

Crack height measurement: implementing diffraction to measure the height of cracks

HS600 Technical Parameters:

Pulse intensity: 600V

Impedance matching: available in two levels of 200 Ω and 500 Ω

Working methods: Single crystal flaw detection, twin crystal flaw detection

Scanning range: Zero interface incidence~5500mm steel longitudinal wave

Repetition frequency: available in three levels: 60, 120, and 200Hz

Sampling frequency/bits: 150MHz/8bits

Detection methods: full detection, positive and negative detection, RF wave display

Operating frequency: 0.5MHz~20MHz (bandwidth options: 0.5-4MHz, 2-8MHz, 0.5MHz-20MHz)

Equivalent input noise for each frequency band:<15%

Attenuator accuracy: ＜ ± 1dB/12dB

Gain adjustment: 110dB (0.1dB, 2dB, 6dB step, fully automatic adjustment)

Speed range: (100-20000) m/s

Dynamic range: ≥ 30dB

Vertical linear error: ≤ 3%

Horizontal linear error: ≤ 0.1%

Resolution:>40dB (5N14)

Sensitivity margin: ＞ 60dB (200mm deep, Φ 2 flat bottomed hole)

Digital suppression: (0-80)%, does not affect linearity and gain

Power supply and voltage: direct current (DC) 7.2V ± 10%; AC 220V ± 10%

Working hours: Continuous work for more than 5 hours (powered by lithium batteries)

Environmental temperature: (-10~40) ℃ (reference value)

Relative humidity: (20-95)% RH

Dimensions: 200 x 138 x 60 (mm)