Grain Rapid Precipitation Meter

Grain Rapid Precipitation MeterMain technical indicators:
Working temperature range: 40 ℃~200 ℃
Stable range of drying temperature: 50 ℃~160 ℃
Temperature uniformity ± 2 ℃
Temperature display resolution 0.1 ℃
Temperature fluctuation ± 0.5 ℃
Power supply 220V, 50Hz
Rated power 3.8kW
Dimensions (width x depth x height) 800 x 600 x 1770mm
The instrument weighs approximately 180kg

This instrument is a rapid precipitation instrument for grain that integrates drying, cooling, temperature, and time control. By using hot air drying and setting the drying time and temperature reasonably, followed by ventilation and cooling, the moisture content of high moisture corn can be reduced to below 18.0% in a short period of time, and the moisture content of the dried corn kernels can be ensured to be uniform without damage from drying heat. The technical requirements and main parameters of this instrument meet the requirements of Appendix B "Technical Conditions and Operating Methods for Corn Rapid Drying and Precipitation Equipment" of GB1353-2009 "Corn".

Instrument features:
By using hot air drying and mechanical ventilation, the moisture content of high moisture corn can be dried to within 18.0% in a short period of time;
Adopting PID temperature control technology, it has high precision, high stability, and easy operation;
Equipped with protection functions such as over temperature and short circuit to ensure system operation;
Has good insulation, insulation and ventilation effects, easy to clean, and durable;
Can simultaneously dry and cool 4 samples, each weighing 1kg;
The bottom of the sample tray is a standard sieve with good ventilation. The samples are distributed in a single layer inside the tray, with a thickness of about 1cm;
The temperature of the hot air in the drying room is stable, the airflow is steady, and the sample is heated evenly;
The dried corn is cooled in a cooling room with auxiliary ventilation at room temperature. After precipitation, the moisture content of the corn is uniform and there is no damage to the grains caused by drying heat; The shell is made of cold-rolled steel plate electrostatically sprayed, with a smooth and even appearance, without paint leakage, paint hanging, cracks, rust, and deformation.