GJ641X-6C pneumatic lining tube clamp valve

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

GJ641X-6C Pneumatic O-ring Clamp Valve I. Main structural type: This valve consists of valve body, rubber sleeve, large and small valve stems, pressure plate, pull rod, bracket, handwheel and other parts. 2、 The working principle is that when the handwheel is turned in the clockwise direction, the large and small valve stems rotate simultaneously to drive the upper and lower pressure plates to compress the rubber sleeve and close it, and vice versa to open it. This way, the pressure plate reciprocates up and down between the pull rods to complete the valve opening and closing work. 3、 Attention: Due to the low pressure bearing capacity of the rubber tube sleeve, when opening and closing, if the operator rotates the handwheel and feels an appropriate amount of resistance, the opening and closing poles will be reached. Do not try your best

Product Details

GJ641X-6C pneumatic lining tube clamp valve

1、 Main structural types:

This valve consists of valve body, rubber sleeve, large and small valve stems, pressure plate, pull rod, bracket, handwheel and other parts.

2、 Working principle

When turning the handwheel in the clockwise direction, the large and small valve stems rotate simultaneously to drive the upper and lower pressure plates to compress the rubber sleeve and close it, and vice versa to open it.

This way, the pressure plate reciprocates up and down between the pull rods to complete the valve opening and closing work.

3、 Precautions

Due to the low pressure bearing capacity of the rubber sleeve, when opening and closing, as long as the operator feels an appropriate amount of resistance when rotating the handwheel, the opening and closing poles can be reached. Do not try your best

With the assistance of multiple people, other opening and closing functions are prohibited.

4、 Installation and maintenance

1. This valve can be installed freely on the pipeline without any restrictions on the flow direction of the medium.

2. This valve has low maintenance costs and does not require regular replacement of valve seats, sealing fillers, sealing rings, or expansion pipes. The hose is the only clamp valve that needs to be replaced

Once the rubber hose is replaced, the valve will look like a new valve. This valve rarely requires inventory of other parts.

Main performance range

Main component materials

Size Chart