GJ41X-6L pipe clamp valve

GJ41X-6L pipe clamp valve 1. Main structural type: This valve consists of valve body, rubber sleeve, large and small valve stems, pressure plate, pull rod, bracket, handwheel and other parts. 2、 The working principle is that when the handwheel is turned in the clockwise direction, the large and small valve stems rotate simultaneously to drive the upper and lower pressure plates to compress the rubber sleeve and close it, and vice versa to open it. This way, the pressure plate reciprocates up and down between the pull rods to complete the valve opening and closing work. 3、 Attention: Due to the low pressure bearing capacity of the rubber tube sleeve, when opening and closing, if the operator rotates the handwheel and feels an appropriate amount of resistance, the opening and closing poles will be reached.

This valve consists of valve body, rubber sleeve, large and small valve stems, pressure plate, pull rod, bracket, handwheel and other parts.

When turning the handwheel in the clockwise direction, the large and small valve stems rotate simultaneously to drive the upper and lower pressure plates to compress the rubber sleeve and close it, and vice versa to open it.

Due to the low pressure bearing capacity of the rubber sleeve, when opening and closing, as long as the operator feels an appropriate amount of resistance when rotating the handwheel, the opening and closing poles can be reached. Do not try your best to assist multiple people, and do not use other opening and closing devices.

1. This valve can be installed freely on the pipeline without any restrictions on the flow direction of the medium.