-
E-mail
1064831086@qq.com
-
Phone
13858176802
-
Address
Yuhang Industrial Park, Hangzhou. Building 4, Hangzhou Youpan Era Center
Product Categories
Hangzhou Jihan Technology Co., Ltd
Fish Dumpling Processing Production Line
NegotiableUpdate on 01/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Fully automatic fish dumpling production equipment, fish dumpling processing production line, fish dumpling machine, fish dumpling forming machine, fish dumpling steaming and cooking machine, fish dumpling skin squeezing machine, four pass skin pressing machine, forming and cutting machine, filling machine, fish dumpling steaming and cooking conveying cooling line
Product Details
fully automaticFish dumpling production equipment,Fish Dumpling Processing Production LineFish Dumpling Machine, Fish Dumpling Forming Machine, Fish Dumpling Steaming Machine, Fish Dumpling Squeezing Machine, Four Step Squeezing Machine, Forming Cutting Machine, Squeezing Machine, Fish Dumpling Steaming and Steaming Conveyor Cooling Line
fully automaticFish dumpling production equipment，Fish Dumpling Processing Production LineTechnical parameters
1、 Squeezing machine
1. The stainless steel material used is 304, except for motors, chains, and gears
2. The main frame is made of 45 * 75 * 1.5mm 304 stainless steel material, and the thickness of the stainless steel plates used is 4mm, 8mm, 10mm, and 16mm spliced according to different parts. The screw is made of 304 stainless steel, and the thickness of the blade is 2.5mm of 304 stainless steel.
3. Length: 2.03 meters Width: 0.89 meters Height: 1.35 meters
4. One reduction motor (for Xinnan reducer) with a power of 4KW and variable frequency speed regulation.
2、 Four way leather press machine
1. The stainless steel material used is 304, outside the motor, chain, and gear
2. According to different parts, the stainless steel plates used are 3mm and 4mm spliced together. The outer sealing plate is made of 1mm thick 304 stainless steel. The drum is made of high carbon steel and outer PTFE, with a diameter of 125mm.
3. Length: 4.06 meters Width: 1.1 meters Height: 1.3 meters
4. 8 reduction motors (for Xinnan reducer), each with a power of 0.75KW, and 4 of them are responsible for the upper part of each track
Under the pressure of rolling, four machines are responsible for four conveyor belts, and eight powder spreading motors are used. For every 120W, they are responsible for the upper and lower eight powder machines respectively
The bucket has 8 upper and lower rollers made of 304 stainless steel material coated with non stick pan, with variable frequency speed regulation.
5. The conveyor belt with four layers of leather pressing is a white conveyor belt made of PU with a thickness of 3mm
The card is Tianjin Xibeike.
3、 Forming and cutting machine
1. The stainless steel material used is 304, except for motors, chains, and gears.
2. The main frame is made of 45 * 75 * 1.5mm 304 stainless steel, and the support plate is made of 1.5mm 304 stainless steel
3. Length: 3.87 meters Width: 0.9 meters Height: 1.39 meters
4. Two motors, belt motor: 1.5KW, cutting motor: 120W.
5. The belt is equipped with a cutting and forming device, which can simultaneously form 12 pieces.
6. The conveyor belt is white, made of PU material, with a thickness of 3mm
7. PLC control system (Wuxi Xunjie), variable frequency speed regulation.
4、 Squeezing machine
1. Except for motors, chains, and gears, all others are made of 304 stainless steel
2. The main frame is made of 45 * 75 * 1.5mm 304 stainless steel square tube. The thickness of the sealing plate is 1.0mm for 304
Stainless steel plate. The diameter of the column and filling tube is 108mm, and the thickness is 4mm stainless steel square tube.
The screw is made of 304 stainless steel, and the thickness of the blades is 2.2mm
3. The motor power is 3.75kw
4. Variable frequency speed regulation.
5. There are 12 filling outlets, and the filling can be dispensed at the same time, and the size can be controlled.
5、 Vacuum mixer
1. Except for motors, chains, gears, and pneumatic systems, areas in contact with food are made of 304 stainless steel. 2. The base is made of A3 steel and wrapped in 304 stainless steel material. Thickness of 1.1mm
3. There are two motors, one with a power of 5.5kw and the other with a power of 0.75kw, with both forward and reverse gears.
4. Equipped with a vacuum device, the size of the vacuum pump is 25 cubic meters per hour, and the place of origin is Shanghai Vacuum Pump Factory (changed)
Advanced, joint venture with Germany.
5. Production: Pot capacity of 150 liters
6. Vacuum and face bucket made of 304 stainless steel with a wall thickness of 5mm. The spindle is made of 304 stainless steel with a diameter of 50mm,
The spindle is solid
7. Automatic cylinder reversing
6、 Fish Dumpling Steaming, Steaming, Conveying, Cooling Line
1. Length 25 meters, width 0.8 meters, height 1.5 meters, main frame made of 304 stainless steel square tube, square tube is 45 * 75 * 1.5mm
The steaming box wall, cover plate, and bottom plate are made of 304 stainless steel, and the inner wall of the cover plate is thick
2mm thick 304 stainless steel, bottom plate made of 2mm thick 304 stainless steel, steaming box cover and tank body made of water
seal up. Two exhaust fans, each with a power of 0.75KW, the driving wheel motor is 2.2KW with a reducer,
Each motor is equipped with variable frequency speed regulation.
2. The entire mesh belt is made of 304 stainless steel mesh chain, with a width of 0.65 meters. The diameter of the stainless steel mesh wire in the mesh chain is
1.5mm， The diameter of the small transverse bar in the middle is 1.8mm, the diameter of the large transverse bar is 5mm, and the diameter of the large transverse bar is 5mm
The middle interval is 16.6cm, the middle interval of the small cross bar is 13mm, and nylon is laid on the conveyor chain
The weaving belt and steaming box are equipped with a set of automatic temperature control devices, which are sensitive and reliable. The entire conveyor adopts variable frequency speed regulation.
3. Cooling adopts water spray cooling.
4. The upper cover is made of 1.2mm thick 304 stainless steel material, and is sealed with water around the cover to ensure safety
Steam does not leak, saving energy and steam.
5. Main tank body: The two sides and bottom of the tank body are insulated with a sandwich layer, with the inner layer made of 2.0mm stainless steel and the outer layer made of stainless steel
The package is made of 1.0mm stainless steel and the interlayer material is silicate fiber, with a thickness of 50mm (including the wall thickness on both sides).
(Seal as tightly as possible).
6. Leave 1 meter each for the feeding area and cooling area, and 23 meters in the middle inside the steam line tank.
Note: 1. The frequency converter adopts Furuiken frequency converter,
2. The motor adopts Zhejiang Xinnan Motor.
3. All electrical parts are Zhejiang Delixi brand or Taiwan, China Shilin.
4. Stainless steel mesh belt in the groove
5. The length of the steaming line is 25 meters
Technical parameters of fish dumpling production line
1、 Squeezing machine
1. The stainless steel material used is 304, except for motors, chains, and gears
2. Length: 2.03 meters Width: 0.89 meters Height: 1.35 meters
3. One reduction motor (for Xinnan reducer) with a power of 4KW per unit and variable frequency speed regulation.
2、 Four way leather press machine
1. The stainless steel material used is 304, outside the motor, chain, and gear
2. Length: 4.06 meters Width: 1.1 meters Height: 1.3 meters
3. There are 8 reduction motors (Xinnan reducer) with a power of 0.75KW each. Four of them are responsible for the upper and lower rollers of each track, and four are responsible for 4 conveyor belts. There are 8 powder spreading motors with a power of 120W each, which are responsible for 8 powder hoppers. The 8 rollers are made of 304 stainless steel material and coated with non stick pans, with variable frequency speed regulation.
4. The four conveyor belts for pressing leather are white conveyor belts
3、 Forming and cutting machine
1. The stainless steel material used is 304, except for motors, chains, and gears.
2. Length: 3.87 meters Width: 0.9 meters Height: 1.39 meters
3. Two motors, belt motor: 1.5KW, cutting motor: 120W.
4. The belt is equipped with a cutting and forming device, which can simultaneously form 12 pieces.
4、 Packaging conveyor line
1. The frame is made of 304 stainless steel, with active and passive pulleys made of 45 # seamless galvanized steel pipes, support rods made of PVC pipes, and a white conveyor belt.
2. Motor power: 1.5KW, conveyor belt is variable frequency speed regulation
3. Length: 12.65 meters, Width: 1.21 meters, Height: 0.7 meters (adjustable)
4. 2mm 304 stainless steel material on both sides of the conveyor belt.
5. The rack is made of 45 * 75 * 1.5mm 304 stainless steel square tube.
5、 Squeezing machine
1. Except for motors, chains, and gears, all others are made of 304 stainless steel
2. The rack is made of 45 * 95 * 2mm 304 stainless steel square tube.
3. The motor power is 3.75kw
4. Variable frequency speed regulation.
5. There are 12 filling outlets, and the filling can be dispensed at the same time, and the size can be controlled.
6、 Vacuum and noodle machine
1. Except for motors, chains, gears, and pneumatic systems, areas in contact with food are made of 304 stainless steel.
2. The base is made of A3 steel and wrapped in 304 stainless steel material.
3. There are two motors, one with a power of 5.5kw and the other with a power of 0.75kw, with both forward and reverse gears.
4. Equipped with vacuum device.
5. Production: 130-140kg/round
6. Vacuum and face bucket made of 304 stainless steel with a wall thickness of 5mm. The spindle is made of 304 stainless steel with a diameter of 50mm.
7、 Steaming and Steaming Conveyor Cooling Machine
1. The length is 14 meters, width is 0.8 meters, and height is 1.5 meters. The bracket is made of 304 stainless steel square tube, the steaming box wall is made of 304 stainless steel, and the wall, cover plate, and bottom plate are made of 1.5mm 304 stainless steel. The steaming box cover is water sealed.
2. Two exhaust fans, each with a power of 0.75KW. The driving wheel motor is 1.5KW with a reducer, and each motor is variable frequency speed regulation.
3. The entire mesh belt is made of 304 stainless steel mesh chain, with a width of 0.68 meters. Nylon woven belt is laid on top of the conveyor mesh chain, and each section of the cooking box has a temperature measuring device.
4. Cooling adopts water spray cooling.
Similar Product Recommend
