Explosion proof electric water distribution gate valve for mining

NegotiableUpdate on 01/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The explosion-proof electric water distribution gate valve for mining is mainly used for water distribution in underground suction wells and for drainage in mineral processing and water treatment facilities. It has the characteristics of compact structure, reliable sealing, and flexible operation.

Product Details

1Explosion proof electric water distribution gate valve for miningProduct Introduction

Mining water distribution gate valves are mainly used for underground water intake well water distribution, mineral processing, and water treatment facility drainage in mines. They have the characteristics of compact structure, reliable sealing, and flexible operation. The following is the main product information:

IIExplosion proof electric water distribution gate valve for miningProduct Features

Structure: Welded valve body and disc are used, with good sealing performance. The disc is connected to the valve stem through a ring screw assembly, achieving flexible switching. ‌

Material: The lower part of the valve body is equipped with a conical sealing ring to enhance the sealing effect.

Drive mode: manual (Type I) and electric (PZ2) versions, with the electric version equipped with a small electric motor for automated operation. ‌

Applicable scenarios: Non corrosive media with water temperature ≤ 80 ℃, nominal pressure 0.1MPa (test pressure 0.25MPa). ‌

Model

The nominal diameter covers 400-1200mm, and the electric version is equipped with different power motors (such as ZB20-24 to ZB60-24 models). ‌

The operating stroke varies from 220-350mm depending on the diameter

Installation adaptation

The short pipe design is used to embed into the wellbore, and the length of the connecting rod is customized according to the height of the pump room (usually 4-5 meters), suitable for different installation spaces.

The main product advantages of mining water distribution gate valves are reflected in the following aspects:

Reliable sealing performance

Adopting a combination design of conical sealing ring and valve disc to ensure sealing effect, effectively prevent water from overflowing from the water tank, and ensure the normal operation of the water pump. ‌

Easy to operate

The manual version (such as PZ1 type) achieves remote control through the valve stem and connecting rod, while the electric version (such as PZ2 type) is equipped with a small electric motor drive, simplifying the underground operation process. ‌

Strong ability to withstand pressure

The welded structure of the valve body and valve disc can withstand a pressure of 1MPa and adapt to high-pressure working conditions underground in mines.

Wide range of applications

Suitable for scenarios such as water distribution in underground water absorption wells and discharge from mineral processing water tanks, supporting clear water media with a water temperature below 80 ℃.

compact structure

The manual version is lightweight, simple in structure, and saves installation space; The electric version adds a driving device that still maintains the characteristics of low current resistance and easy maintenance.