Concrete core cutting machine

1、 HQP-150 typeConcrete core cutting machineOverview
The HQP series concrete slicer uses diamond saw blades for cutting. Suitable for using the drilling core method to test the compressive strength of concrete by sawing the irregular two end faces of the drilled core sample, in order to make the core sample have more regular two end faces and the required length. This machine is equipped with specialized fixtures to ensure that the test piece is firmly fixed, the sawing end face is balanced, and there will be no peripheral damage.
HQP-150 typeConcrete core cutting machineThe diamond saw blade used has the characteristics of good rigidity, long service life, and high cutting efficiency, so it is widely used for sawing various samples in concrete testing. It can also be used for sawing and cutting irregular bricks in construction.
2、 HQP-150 typeTechnical Specifications
1. Sawing specimen diameter: 50mm, 75mm, 100mm, 150mm;
2. Sawing test piece length: greater than 40mm;
3. Spindle speed: 2300r/min;
4. Rated power of motor: 2.2kw;
5. Saw blade diameter: 400mm;
6. Dimensions: 900 × 460 × 830mm;
7. Whole machine weight: 80kg.
3、 HQP-150 typePrecautions
1. The main rotation direction of the saw blade should conform to the direction of the arrow shown on the protective cover. If reverse is found, the power should be cut off immediately and the direction should be reversed. It is ideal for users to provide their own reverse sequence switch.
2. When sawing, it is necessary to first water the blade and remember not to cut it dry, otherwise it will damage the saw blade.
3. The drainage outlet of the sink should be unobstructed and not blocked by debris.
4. The slicer should have a reliable grounding device on site to prevent accidents from occurring.
5. After slicing, the power plug should be unplugged and the fixture sink and other parts should be wiped clean to prevent rusting.