Coleparmer digital melting point meter from the United States

The design of Cole Parmer digital melting point analyzer is for greater versatility and ease of use. The selection, measurement, and display of temperature are all digitized, ensuring accuracy and avoiding the need for glass thermometers. Two samples can be tested simultaneously. They are observed clearly through a magnifying glass with the assistance of built-in lighting. The retractable feet allow the device to operate at the optimal viewing angle. It can be fully accessed for easy cleaning and maintenance.

Before use

Place the digital melting point meter on a sturdy horizontal surface and extend the support legs at the back of the instrument to place it at a convenient viewing angle.

Connect to the power supply and use the power on/off switch to turn on the device. The actual block temperature will now be displayed on a three digit LED screen, and the lighting in the sample chamber will be turned on.

operation

The design of a digital melting point meter is to provide fast and accurate results as well as optimal usability. The melting point sample is placed in a glass capillary tube, and the capillary tube is placed in an aluminum block inside the sample chamber. The block is heated and the sample is observed through a magnifying glass on the observation tube until melting occurs. The melting point temperature can be easily read from a large LED display screen. To avoid the need for continuous observation of the sample, the device is equipped with a 'platform' function. This allows the temperature to be set several degrees lower than the expected melting point. Then, the device will quickly heat up to that temperature (20 ℃/min) and maintain that temperature until the operator is ready to start measuring. It is safe to leave the machines unattended during the operation of this platform

03011-30 and 03012-35

The device will slowly heat up from the platform temperature (2 ℃/min) until melting occurs. This slow heating rate allows for very precise melting points to be obtained

03012-07 and 03012-17 (high-resolution version)

The heating rate can be adjusted between 1 ℃/min and 10 ℃/min. This can obtain fast results and more accurate melting point results

Specifications:

120

120V