Chemical raw material tank mixer

NegotiableUpdate on 01/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The trough mixer for chemical raw materials is suitable for food, medicine, pesticide, zinc oxide, detergent, veterinary medicine, compound fertilizer, feed, petroleum, metallurgy and mining, building materials industry, paint, dye, pigment, additives, calcium carbonate, biology, ceramics, chemical industry, essence and spice, chicken essence, condiment, tea, grain, starch, plant fiber, milk powder, cocoa powder, flour, coffee, glucose and other industries.

Product Details

The main purpose of the chemical raw material trough mixer is that it is widely used for mixing dry powder materials in industries such as pharmaceuticals and chemical food. It can also quickly and uniformly mix several materials with different densities and particle sizes. The slot mixer utilizes the alternating pulse motion of * to continuously push and mix materials, and its produced vortices have varying ability gradients, resulting in excellent mixing effects. The machine also has the advantages of smooth operation, low noise, high loading system, and short mixing time.

Working principle of chemical raw material tank mixer: This machine uses mechanical transmission to rotate the S-shaped stirring blade, pushing the material to flip back and forth and mix evenly. The operation adopts electrical control, and the mixing time can be set. When the time is up, it will automatically stop and the material will be poured electrically, thereby improving the mixing quality of each batch of materials and achieving high uniformity of mixing.

Instructions and precautions for use: 1. Before use, an air run test should be conducted. Before the test, the firmness of all connecting parts of the horizontal trough mixer, the amount of lubricating oil in the reducer, and the integrity of the electrical equipment should be checked. Then, the main switch should be closed, the power should be turned on, and the air run test should be carried out. 2. Air freight conversion test requires item by item testing. Production can only be put into operation if no abnormal noise, high temperature of the bearing gear, or direct temperature rise of the reducer are found. 3. If groove wall materials are needed during operation, bamboo and wooden tools should be used, and hands should not be used to avoid hand injury accidents. 4. If abnormal vibration or abnormal noises are found during the use of the horizontal trough mixer, the machine should be stopped immediately for inspection. 5. The load of the mixer should not be too high, usually measured by the load of the electric motor. The heavy load current of the 380V electric motor during mixing should not exceed 6 amperes, which is normal. If the load is exceeded, the mixing capacity should be immediately reduced. 6. The shaft seals at both ends of the mixing blade should be kept clean to avoid blackening and deterioration of the material. Square holes should be left on the outer baffles at both ends of the mixing tank, which should be unobstructed and not blocked to prevent back pressure from seeping into the shaft, causing blackening and deterioration of the material in the tank. 7. Management personnel must be familiar with the technical performance, internal structure, and operating principles of the control structure of the horizontal trough mixer. During operation, it is not allowed to leave the work site to prevent mechanical damage caused by malfunctions, in order to ensure safe production.

Technical Specifications

model	CH-50	CH-100	CH-150	CH-200	CH-300	CH-400	CH-500
Blade form	S-type single propeller	S-type single propeller	S-type single propeller	S-type single propeller	S-type single propeller	S-type single propeller	S-type single propeller
Working volume L	50	100	150	200	220	300	400
Mixing speed rpm	24	24	24	24	24	24	24
Flip angle r/min	<105	<105	<105	<105	<105	<105	<105
Mixing motor kw	1.5	2.2	3	4	5.5	5.5	7.5
Feeding motor kw	0.37	0.55	0.55	0.75	1.1	1.1	1.5
Dimensions mm (length)×wide×High)	1200×500 ×950	1400×580 ×1000	1600×600 ×1150	1800×600 ×1250	2150×700 ×1250	2280×800 ×1250	2400×900 ×1250
Weight kg	200	250	300	320	550	680	720