Welcome Customer !

Membership

Help

Huizhou Daya Bay Aite Instrument Co., Ltd
Custom manufacturer

Main Products:

foodequippro>Products

Huizhou Daya Bay Aite Instrument Co., Ltd

  • E-mail

    Amy@ultrainst.com

  • Phone

    13437720684

  • Address

    Room 807, Unit 2, Building 1, Aotou Oriental Xintiandi Building, Dayawan District, Huizhou City

Contact Now

CT-1000 High Temperature Viscosity Tester

NegotiableUpdate on 10/27
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

CT-1000 High Temperature Viscosity Tester

Product Details

The CT-1000 high-temperature constant temperature bath is specifically designed for measuring accurate viscosity with glass capillary viscometers, but it can also be used for other instruments immersed in a constant temperature bath that are transparent and require precise temperature control.

There are seven circular holes with a diameter of 51 millimeters on the top cover to accommodate the viscometer bracket, which can measure seven viscosity parameters simultaneously. The two additional holes are for thermometers, and if other specialized holes are needed, they can be specified when ordering.

The CT-1000 constant temperature bath has an internal temperature control accuracy of ± 0.01 ℃ within the range of 20 ℃ to 150 ℃, fully meeting the requirements of ASTM D445 for measuring kinematic viscosity. The dual tube electric heater can quickly control the temperature to the desired value. If the cooling pipeline of the constant temperature bath is connected to tap water or a cooling system, the temperature can be controlled below or slightly above the ambient temperature.

There is a dedicated knob on the panel that can quickly set 10 commonly used kinematic viscosity temperatures, which are 20, 25, 30, 40, 50, 60, 80, 100, 135, and 150 ℃. After temperature setting, the temperature of the constant temperature bath will be balanced within ± 0.2 ℃ of the desired temperature. Fine adjustment of the knob can adjust the temperature to within ± 0.01 ℃ of the target temperature. If the knob on the panel is placed in "VARIABLE", the temperature can be set at any point within the allowable range. The solid-state temperature control circuit adopts proportional temperature control, and a thermistor with a stainless steel shell is used as the sensing element. The motor-driven stirrer ensures uniform constant temperature. The entire electrical system is placed in a push-pull electrical cabinet, making adjustment and maintenance simple and easy.

The bath is a transparent glass container with a diameter of 300 millimeters and a height of 300 millimeters. A stainless steel baffle is located in the middle of the bath to ensure a single reflective background for observation. There are fluorescent tubes on both sides of the bath to provide uniform, bright, and non dazzling illumination inside the bath.

Multiple safety measures ensure safety. The first is the use of dual thermistors for over temperature protection. If an over temperature is detected, all power sources will be cut off until the operator resets the over temperature limit circuit. The second safety measure is that when the thermistor is controlled to open circuit, all power sources will be cut off. Finally, the constant temperature bath must be filled with liquid to a safe level before starting. The liquid level controller will ensure that the control circuit starts heating only when the liquid level reaches the safe level. If the liquid level drops to the lowest safe level, the electric heater will automatically shut off.

All components in contact with liquids are made of stainless steel, the frame is made of rust proof steel resin composite thick aluminum plate, and the top cover is made of stainless steel panel, intermediate insulation layer, and stainless steel heat reflection plate.

characteristic:

Size: 483mm×464mm×584mm
Net weight: 43 kilograms
Gross Weight: 48 kilograms
power supply Model CT-1000F 240V 50/60Hz 1000W (suitable for use in China)

CT-1000 drawer (optional)

This sturdy double-layer drawer is placed under the CT-1000 constant temperature bath, which raises the bath for observation and storage of viscometers and other components.

Size: 457mm×457mm×165mm
Net weight: 10.9Kg