Asphalt mixture uniaxial compression testing machine

Product Introduction

Asphalt mixture uniaxial compression testing machineSuitable for determining the compressive strength of hot mix asphalt mixtures based on their compressive rebound modulus. According to the "Design Specification for Asphalt Pavement of Highways" (JTJ014), the design parameters of the asphalt mixture structural layer shall be determined using the English version method.

Asphalt mixture uniaxial compression testing machine
Key Features:
1. Equipped with overload protection and over fall protection.
2. Easy to operate, accurate test data, stable and reliable performance.
3. The instrument performs automatic testing, displays and prints the test pressure and corresponding flow values, and draws a coordinate curve of the deformation of the specimen under stress.
4. Can store the test results of 15 sets of specimens.
5. Large LCD screen display.
6. There are two types of flow value detection: single channel and dual channel.
7. The experiment is automatically controlled by instruments or computers, and the data and curves of the deformation process of the specimen under compression are automatically saved and displayed by the computer. They can be printed out by a printer, such as a high-end color inkjet printer.
8. The machine is equipped with a USB interface.
9. Optional serial port, the upper computer software can perform analysis and processing.

【 Main features 】: 1. Equipped with overload protection and descent over position protection. 2. Easy to operate, accurate test data, stable and reliable performance. 3. The instrument performs automatic testing, displays and prints the test pressure and corresponding flow values, and draws a coordinate curve of the deformation of the specimen under stress. 4. Can store the test results of 15 sets of specimens. 5. Large LCD screen display. 6. There are two types of flow value detection: single channel and dual channel. 7. The experiment is automatically controlled by instruments or computers, and the data and curves of the deformation process of the specimen under compression are automatically saved and displayed by the computer. They can be printed out by a printer, such as a high-end color inkjet printer. 8. The machine is equipped with a USB interface. 9. Optional serial port, the upper computer software can perform analysis and processing. 【 Main technical indicators 】: 1. Rising rate: (50 ± 5) mm/min. 2. Head diameter: (102 ± 0.2) mm. 3. Maximum pressure: 50KN with an accuracy of 1%. 4. Flow range: 0-15.00mm with an accuracy of ± 0.1mm. 5. Environmental temperature: ≤ 30 ℃. 6. Relative humidity: ≤ 85%. 7. Power consumption of the whole machine: not exceeding 700W. 8. Dimensions: 70x50x90mm. 9. Net weight of the instrument: 100kg. 10. Power supply voltage: 220V

The

Hebei Ruida Construction Instrument Equipment Co., Ltd
Production and sales: highway testing instruments, railway testing instruments, concrete testing instruments, universal material testing machines, pressure testing machines, cement testing instruments, geotechnical testing instruments, asphalt testing instruments, mortar testing instruments, waterproofing membrane testing instruments, building energy-saving testing instruments, surveying instruments, main structure testing instruments, steel structure testing instruments, non-destructive testing instruments, wire and cable testing instruments, pipe and fitting testing instruments, ceramic tile testing instruments, insulation material testing instruments, coating testing instruments, geosynthetic material testing instruments