-
E-mail
Amy@ultrainst.com
-
Phone
13437720684
-
Address
Room 807, Unit 2, Building 1, Aotou Oriental Xintiandi Building, Dayawan District, Huizhou City
Huizhou Daya Bay Aite Instrument Co., Ltd
Amy@ultrainst.com
13437720684
Room 807, Unit 2, Building 1, Aotou Oriental Xintiandi Building, Dayawan District, Huizhou City
instrument Standard Accessories Optional accessories 2-year spare parts selection Instrument Features integrated design In order to make your work easier and faster, we spared no cost to first invent an integrated cup lid, Simple operation You only need to set the expected flash point for the entire homework process, press the start button, and the instrument will automatically run, Dual use of gas and electricity Abl-8l can be used as an ignition source in two ways: flame ignition and electronic ignition. You can switch between the two methods in just a few minutes. Airflow protective cover For the stability of the flame and user safety, we spare no expense, data saving The instrument itself can store 200 data and can be freely printed to an optional printer or uploaded to the LIMS system through the RS-232 interface USB port A SUB port can be connected to a USB keyboard for easy input of sample names, and can also be connected to an external USB drive to copy data to a computer Compact and Green Design The use of semiconductor cooling/heating design makes the structure more compact and small, Specifications Refrigerator specifications (specific for abla-8l model) Control temperature range:5 ℃ -+40 ℃ or wider Pump specifications:Pressure: 0.2 bar Minimum flow rate: 2L/min Minimum 冷却功率:250W @ 10 ℃ minimum power Heating power:500W minimum Coolant volume: 3L minimum
CODE
PART NAME
REMARKS
APM-00-015
abl-8l
Abel closed flash point (external refrigeration model)
CODE
PART NAME
Qty
REMARKS
ABL-01-411
Test cup
1
320-00-035
thermal fuse
1
A set of 5 pieces
-----
Gas Hose 9 x 16, 1.5m, with Hose Bands
1
Gas pipe 1.5m, with clamps 2pcs
ABL-01-401
windshield
1
210-02-191
insulated pipe
2
Only applicable to abla-8l
170-01-051
Insulation pipe plastic clamp
4
Only applicable to abla-8l
MPC-02-032
power cord
1
Length 1.8m, voltage 100V~120V
MPC-02-033
Length 1.8m, voltage 220V~230V
―――
Instruction Manual
1
l
CODE
PART NAME
REMARKS
070-00-068
printer, BS2-80TS
External printer, optional accessories
070-00-281
keyboard
Enter the sample name and operator into the instrument
refrigerator
Only applicable to Abl-8l type, temperature range 5 ℃~40 ℃
CODE
PART NAME
Qty
ABL-01-411
Test cup
1
320-00-035
thermal fuse
1
ABL-01-003
Electronic ignition head, model EI-8
2
ABL-01-011
temperature sensor
1
ABL-01-012
Flash point detection sensor
1
Integrate the temperature sensor, stirrer, and flash point sensor onto the cup lid, while fixing the cup lid onto the detection arm,
At the end of the experiment, you only need to lightly press the release button of the detection arm to easily and safely remove the hot oil cup.
Compared to the previous generation product, we use a hydraulic brake detection arm that can be vertically 90 degrees, making it easier to clean the cup lid.
At this point, you can go do other work in the same laboratory. During this period, the instrument operates according to the standard method you have chosen to determine the flash point
And the buzzer will prompt the result, which will be continuously displayed on the LCD screen.
Equipped with a windproof cover made of high-grade fire-resistant/smoke proof material
(The material has been verified by the US fire and disaster prevention standard FM4910, ensuring FPI ≤ 6 and SDI ≤ 0.4)
More energy-efficient. Depending on the flash point value of the sample, air cooling or a refrigeration unit with distilled water can meet the cooling requirements,
Thus, the use of methanol can be avoided. The control and measurement departments are combined into one, reducing external wires and making the appearance more concise.
The air-cooled model abla-8a and the liquid cooled model abla-8l are available for different testing ranges based on flash point values
type
Integrated design, microprocessor control
Test Standard
GB/T 21789,IP170, ISO 13736, ISO 1516, ISO 1523
Flash point measurement range
Abla-8a:+10 ℃ -+110 ℃ at room temperature of 10 ℃ -30 ℃
Abl-8l: -30 ℃ -+80 ℃ in the cooling liquid (inside the refrigerator) at 10 ℃
0 ℃ -+110 ℃ in the cooling liquid (inside the refrigerator) at 40 ℃
Measurement Mode
ISO 13736 Normal Mode (same as GB/T 21789/IP170)
ISO 13736 Special Mode (Unknown Sample Mode) (Same as GB/T 21789/IP170)
ISO 13736 Quick Mode (same as GB/T 21789/IP170), ISO 1516, ISO 1523, and User Defined Mode
bath
metal bath
Sample heating/cooling method
semiconductor
display screen
5.7-inch (117 * 88mm) color LCD display
stirring speed
0,30rpm (switching)
temperature sensor
Stainless steel sealed A-grade PT-100
Flash point detection sensor
CRC verification thermocouple
ignition method
Gas electric dual-use, switchable
Atmospheric correction method
Automatic calibration of atmospheric pressure (the instrument comes with an internal atmospheric pressure sensor)
output port
1 RS-232C, can be connected to a printer or computer
1 USB port, capable of connecting a USB keyboard or USB flash drive
Safety cut-off function
Interrupt the experiment and the buzzer will sound an alarm and display in the following situations
a. Expected flash point+10 ℃ or 70 ℃ (ISO 13736 GB/T 21789/IP170) to reach 110 ℃ (ISO 1516, ISO 1523)
b. Temperature sensor damaged
c. The flash point detection sensor is damaged
d. The temperature fuse is blown
e. Electronic ignition head damaged
f. The test cover is not in place
Gas type (using flame ignition method)
Liquefied gas or natural gas (maximum pressure: 10Kpa)
power supply voltage
220/240 VAC,50HZ/60HZ
power
250W
Energy consumption and carbon dioxide emissions
Each experiment consumes approximately 30Wh (about half an hour) and 11.34g of carbon dioxide (@ 0.378kg of carbon dioxide/1kWh)
Ambient Temperature
10℃--- +35℃
Volume and weight
230mm (W) × 470mm (D) × 390mm (H) 16kg
Type:Circulating cooling/heating capacity