ZUI-H630x10FP Dawn Oil Absorption Filter

According to the accuracy of the filter, it can be divided into coarse filter, ordinary filter, fine filter, and ultra fine filter; Divided by filter element type: mesh filter, wire gap filter, paper core filter, sintered filter, magnetic filter; Divided by filter material type: surface type, depth type. The dawn filter is installed on the oil suction pipeline of the hydraulic pump. This installation method requires the filter to have a large oil flow capacity and a small resistance, so a coarse filter with lower filtration accuracy is generally used to protect the hydraulic pump. The filter is installed on the return oil pipeline, which can frequently remove impurities from the oil. To prevent the oil from flowing back to the tank smoothly even when the filter is clogged, a safety valve should be connected in parallel. Due to the low pressure of the return pipe, a filter with lower strength can be used. Installed on the oil pipeline of the hydraulic pump, this installation method can protect other components except for the hydraulic pump and relief valve. Generally, fine filters are used. Due to the operation of the filter under high pressure, the filter element and housing should be able to withstand the working pressure and impact pressure of the system. To prevent pump overload or damage to the filter element caused by filter blockage, a blockage indicator device or a safety valve can be installed in parallel on the pressure oil circuit. Install separate fine filters in front of important components as needed to ensure their proper functioning.

1. Metallurgy: Used for filtering hydraulic systems of rolling mills and continuous casting machines, as well as filtering various lubrication equipment.

2. Petrochemicals: Separation and recovery of products and intermediate products in refining and chemical production processes, as well as particle removal and filtration of oilfield injection water and natural gas.

3. Textile: Purification and uniform filtration of polyester melt during wire drawing process, protective filtration of air compressor, and removal of oil and water from compressed gas.

4. Electronics and pharmaceuticals: pre-treatment filtration of reverse osmosis water and deionized water, pre-treatment filtration of cleaning solution and glucose.

5. Thermal power and nuclear power: Purification of oil for lubrication systems, speed control systems, bypass control systems of gas turbines and boilers, purification of feed pumps, fans, and dust removal systems.

6. Mechanical processing equipment: lubrication systems and compressed air purification for paper making machinery, mining machinery, injection molding machines, and large precision machinery, filtration for tobacco processing equipment and spraying equipment.