Vertical impact table

NegotiableUpdate on 06/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Explanation: The WS-CJ-1010 vertical impact table adopts a motor-driven screw pair lifting, built-in hydraulic brake locking, and release table, which collides with the anvil to generate impact. Installing different waveform generators can obtain corresponding waveforms with response spectrum analysis capabilities.

Product Details

1、 Equipment Overview

The WS-CJ-1010 vertical impact table adopts motor-driven screw pair lifting, built-in hydraulic brake locking, and release table, which generates impact when colliding with the anvil. Installing different waveform generators can obtain corresponding waveforms with response spectrum analysis capabilities.

The WS-CJ-1010 vertical impact table is applicable to standards such as GJB150, GJB360, GJB548, GB/T2423, JJG1174, IEC68-2-27, etc.

The WS-CJ-1010 vertical impact table is mainly composed of two parts: the mechanical table body and the control measuring instrument.

2、 Technical parameters

project	finger treetop			unit
Large load	300(including fixtures)			kg
table size	1000×1000			mm
Install thread	M16@200×200
wave form	half-sine	Back peak sawtooth wave	Trapezoidal wave
Acceleration range	100～2500	150～1000	300～1000	m/s^2
Pulse width range	30～4	18～6	12～6	ms
Significant impact height	1200			mm
External dimensions	～1600×1200×2300			mm
Overall weight	～4000			kg
Power requirements	220V±10%，50Hz，10A

　3、 Component Introduction

The WS-CJ-1010 vertical impact table adopts a motor-driven screw pair lifting, built-in hydraulic brake locking, and release table, allowing the table to fall freely along the guide and collide with the waveform generator installed on the anvil, generating an impact waveform. The sensor installed on the table collects the waveform signal generated by the impact and transmits it to the analysis software, which displays it on the computer monitor to complete an impact test.

1.1 Platform body

The platform is mainly composed of a buffer seat, a base, an anvil seat, a tabletop, a lifting device, a locking and releasing mechanism, and a guide.

The main body of the WS-CJ-1010 half sine waveform generator is made of engineering rubber or cast polyurethane material. By adjusting the available height of the main body, various different impact pulse widths can be obtained, ranging from 4 to 30ms. In special circumstances, wool felt or cowhide can be used as substitutes.

Control measuring instrument

The control measuring instrument adopts our company's DRM-SEV series impact and collision control measuring instrument, which has mature and reliable technology. The software interface developed based on the Windows operating system is simple and convenient to operate.

The DRM-SEV series impact control measuring instrument is mainly used to control the action process of the impact platform, measure impact test parameters such as acceleration, pulse duration, and velocity change during the impact process, and can print all measurement data. It has the advantages of user-friendly interface, easy operation, and reliable system.