Welcome Customer !

Membership

Help

Zhongshan Anyuan Instrument Co., Ltd
Custom manufacturer

Main Products:

foodequippro>Products

Vertical dynamic fatigue testing machine for chassis

NegotiableUpdate on 02/28
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

1、 Experimental principle: Simulate the actual riding process of a bicycle. Under different road conditions, the weight of the rider will exert a certain amount of pressure on the saddle, which will be transmitted to the frame through the saddle tube. Especially when riding on bumpy roads, the force on the frame is relatively large and frequent. Therefore, the quality of the frame is related to the safety and convenience of the entire vehicle's use

Product Details

1Test principleIn the actual riding process of a simulated bicycle, under different road conditions, the weight of the rider will exert a certain pressure on the saddle, which will be transmitted to the frame through the saddle tube. Especially when riding on bumpy roads, the force on the frame is relatively large and frequent. Therefore, the quality of the frame is related to the safety and convenience of the entire vehicle. This testing machine is based onThe fatigue test related standards EN14764 and EN14766 are designed, and the entire test system is automatically controlled by a computer. The force application system adopts force closed-loop control, and automatically returns when the test force applied to the frame reaches the set force.
2、 According to the standard:EN 14764:2005 4.8.4
EN 14766:2005 4.8.6

capacity(kgf)

500kgf x 2 sets

Accuracy of experimental force values

±5%

Maximum operating amplitude (mm)

±100

displacement sensor

LVDT accuracy ± 0.01mm

Power source

Pneumatic servo control system

frequency range

1HZ-15HZ adjustable

software interface

Large and medium-sized control system

Dimensions (W * D * H)

Host 60 * 45 * 195 (cm)

Weight (approximately)

500KG

power supply

AC220V,15A

Gas source requirements

Need to prepare a 7Kg/cm2 dry gas source


3、 Test method:
1) During the experiment, fix the frame on the testing machine according to the standard method, assuming that the position of the front fork can be manually adjusted to adapt to the size of the frame;
2) Fix the frame and fake front fork on the roller shaft, and fix the rear hook on the rear axle, and lock the rear axle fixing block.
3) During the experiment, the vertical force loading fixture assembly of the frame is fixed on the testing machine according to the standard method. The height position of the loading crossbeam can be manually adjusted to adapt to the height of the frame;
4) Set the required test force value and frequency on the computer.
5) Adjust the maximum allowable deformation of the frame, and if it exceeds this deformation, the machine will automatically stop testing;
6) Start the test program to begin testing. If the test reaches the set number of times or the specimen is damaged, the machine will automatically stop testing and retain the test results.
4、 Main technical parameters:
1. Sensor capacity: 5000N
2. Load element resolution: 1/10000
3. Test force: 600N-1500N can be set (force closed-loop control)
4. Power control accuracy: 0-5% (dynamic)
5. Test frequency: 0-5Hz (adjustable)
6. Test times: 0-999999 times can be set
7. Loading method: Pneumatic loading
8. Database function: Automatically record each measurement result for easy analysis and evidence provision

9. The front pipe of the fake display frame meets the standard test requirements. During the experiment, cooperate with the installation of the first bowl group of the vehicle.
10. The position locking screw is selected as a quick release type for easy operation, and the position adjustment is made using a screw.
11. Shutdown conditions: Stop due to low gas supply pressure, large deformation of the specimen, and cylinder stroke exceeding the set value
12. Equipped with an independent electrical control box, similar to Yongqi's existing one
13. The solenoid valve is equipped with a protective cover to prevent damage.
14. Equipped with a stable air tank to better stabilize the working pressure and ensure a smoother loading force.
15. Pneumatic component brand: SMC from Japan or FESTO from Germany
16. Power supply: 220V 5A
17. Gas source: pressure 0.7MPa, gas flow rate 150L/MIN
The main body of the machine is made of steel components, which have high strength and are not easily deformed.
The machine base is made of solid steel with good stability, equipped with reinforcing ribs and adjustable horizontal feet.

20. The appearance of the machine is electrostatically sprayed and other components are electroplated, with high rust prevention ability and beautiful appearance.