T222M low-noise sleeve control valve

NegotiableUpdate on 07/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

T222M low-noise sleeve control valve

Product Details

T222M low-noise sleeve control valve

The T222M low-noise sleeve control valve adopts a sleeve with small holes or multiple layers of small hole sleeves, which are resistant to cavitation and erosion to reduce noise and vibration.

♦ Trim Type of Internal Components

1. Third level decompression
Suitable for working conditions with a pressure difference of less than 5.5 MPa and a noise level of less than 80 dB (A).

2. Secondary decompression
Suitable for working conditions with a pressure difference of less than 3.5MPa and a noise level of less than 80dB (A).

♦ Standard specifications

Form Type	Low Noise Cage Control Valve
Nominal diameter Body Size	DN20~DN450 (3/4~18)
Nominal Pressure Body Ratings	PN16, 25, 40, 64, 100； ANSI Class 150, 300, 600
Body&Bonnet Material for Valve Body and Cover	WCB, CF8, CF8M, CF3, CF3M, WC1, WC6, WC9, LCB, LCC, LC3, Ha Shi C
Packing Packing	V-PTFE/Flexible Graphite
Gasket gasket	GRAP+304, GRAP+316, PTFE
Connection method: Connections	Flange type (RF, MFM)/Welding type (SW, BW) Welding type (SW, BW)
Coating Color	Brown painting/Stainless steel valve body can be left unpainted. No painting on stainless steel valve body
Executing Agency: Actor	Pneumatic type, electric type, and manual operation type
Valve cover type Bonnet Type	Standard type, bellows sealed type, low-temperature type, heat dissipation type Standard type, bellow seal type, low-temperature type, Fin-Extension type

Note: The above are only standard combinations, and specifications outside of this table are also possible depending on the operating conditions.