T-shaped hot air knife

Made of stainless steel as the blade body, it is durable and long-lasting.

The air outlet is made of straight drawn aluminum alloy processed into blades, which not only maintain hardness and strength, but also ensure reliable precision.

Multiple air inlet diameters to meet different air volume requirements, multiple air inlet methods to choose from, convenient for installation;

The width of the air outlet can be adjusted (with an accuracy of up to 0.1mm), and the length can reach 2m.

The wind source can be a high-pressure and temperature resistant centrifugal fan to reduce power consumption.

The built-in thermocouple can be used for temperature control, over temperature protection, and convenient wiring terminal box.

The main body has a pressure resistance of 2kgf/cm2 and a temperature resistance of 250 ℃.

The electric heating power can be selected from single-phase 1kW-3kW to three-phase 3kW-20kW (depending on the length of 1kW/100mm).

The circulating hot air knife can circulate hot air for reuse, which can save more energy.

Special temperature control box and high-pressure temperature resistant fan must be provided separately for use.

The advantages of Baofeng circulating hot air knife are as follows:

1. Using 2080NiCr electric heating wire, free of iron, to avoid oxidation and burning.

2. The heating wire is suspended and hidden inside the ceramic cavity, allowing hot air to pass evenly through both sides of the heating wire, resulting in a large air volume, low air resistance, and lower temperature of the heating wire.

3. The heating wire is hidden inside the wind knife, and the heating utilization rate is close to 100%.

4. Cut water and dry simultaneously to improve efficiency and avoid water stains and turbulence.

5. The heating wire core adopts a lower surface power density design (as low as 3.7W/cm2), resulting in a longer service life of the heating wire.

6. Equipped with an over temperature protection device to prevent the electric heating wire from breaking due to dry burning, and a temperature control device to adjust the outlet air temperature

7. It can be used continuously for a long time and can be installed inside the equipment as a high-temperature hot air source.

Model Description:

Specification Description:

matters needing attention:

If an air compressor is used to provide air source, the air source must be purified (filtered water, filtered oil, etc.) first to avoid affecting the service life of the electric heating wire.

※ The width of the air outlet has been calibrated according to the customized requirements when the product leaves the factory. If it is necessary to make changes, please deliver it to the original merchant or professional

Personnel carry out calibration to avoid the weakening of product performance through self calibration.

Weight of circulating hot air knife (heating element+other accessories): 1170g/100mm+1900g

If there are any changes to the design or materials, the latest revision shall prevail without prior notice.

CAT0805/MC/ RHAK-1

RHAK circulating hot air knife size diagram

If there are any changes to the design or materials, the latest revision shall prevail without prior notice.