Sulfur dioxide test chamber | Hydrogen sulfide test chamber | Hydrogen sulfide test chamber [Shanghai Taitest De] * Product use (Highland low temperature humiditytestchamber) This product is suitable for corrosion gas testing of components, electronic components, protective layers of metal materials, and industrial products
Sulfur dioxide test chamber | Hydrogen sulfide chamber

Sulfur dioxide test chamber | Hydrogen sulfide test chamberShanghai Tai Test Germany
﹡产品用途 ( High and low temperature-humidity test chamber )
This product is suitable for protective layers of components, electronic components, metal materials, and corrosive gas testing of industrial products.
Characteristics of Box Structure (High and Low Temperature Test Chamber)
The shell material of the box is imported PVC reinforced hard plastic board, with a smooth and even surface, and is resistant to aging and corrosion.
Inner liner material: PVC plastic board.
Box cover material: The box cover is made of fully transparent imported impact resistant board, which is convenient for observing the test condition of the test sample during testing The lid and box are sealed with water to prevent leakage.
The opening of the box cover is a cylinder starting support, making it easy and comfortable to open and close.
The box cover and body are sealed with water to prevent gas from escaping.
The heating method is an inner pot sink style heating method, which heats up quickly and has a uniform temperature distribution.
Circuit control system
Intelligent XMT7512D series.
Thin film KEY BOARD button.
It has power-off memory function, and can continue the remaining test process when restored.
Temperature and humidity control are both carried out using P I . D +S . S . R, Coordinated control of the system on the same channel can improve the stability and lifespan of control components and interfaces.
Touch sensitive settings, digital and direct display.
Having P I . The automatic calculation function of D can reduce the inconvenience caused by manual setting.
In operation or setting, if an error occurs, a warning signal will be provided.
Power outage recording device for five years.
Heating System
Adopting U-shaped titanium alloy high-speed heating electric heating tube.
Completely independent system, without affecting the sulfur dioxide test and control circuit.
The temperature control output power is calculated by a microcomputer to achieve high-precision and high-efficiency electricity efficiency.
Control of sulfur dioxide concentration
The gas concentration is controlled by a measuring cylinder float.
The gas automatically mixes after entering the studio.
The airway is connected using corrosion-resistant silicone tubing.
The exhaust fan adopts a centrifugal plastic fan.
Compliant with the standard
GB9789-88 "Sulfur dioxide corrosion test under normal condensation conditions for metal and other non-metallic organic coatings" requires various corrosive gas tests to be conducted in accordance with relevant standards.
Specifications and technical parameters
Model (CM)
|
T-SQ2-150 |
T- SQ2-250 |
T- SQ2-750 |
|
studio dimensions
(Length * Height * Width)
|
60﹡40﹡45 |
90﹡50﹡60 |
110﹡50﹡75 |
performance metrics |
temperature range |
RT+10℃~50℃ |
relative humidity |
93%~98% |
Temperature Uniformity |
≤±2℃ |
temperature fluctuation |
≤±0.5℃ |
Gas generation method |
Steel cylinder method |
Sulfur dioxide gas concentration |
0.05-1% (volume percentage) |
gas purity |
99.99% |
uniformity |
≤2℃ |
Voltage power supply
|
220(1+10%)V,(50±0.5)HZ |
Usage environment
|
Temperature: 5-35 ℃, humidity: ≤ 85% RH; air quality: no high concentration dust or corrosive gases, and cannot be tested or stored in flammable and explosive gases; The ground is flat and well ventilated; There should be at least one passing space around the equipment, which is ≥ 600mm; the laboratory should have drainage devices, such as sewers and water receiving devices; The experiment requires exhaust gas to be discharged from the laboratory. |
|
Note: 1. T → representsTai Shi De
|