Single axis acceleration sensor current type (effective value 4-20mA output) LZDL1-Y

NegotiableUpdate on 03/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

This series of industrial acceleration sensors are produced using military grade process standards and are suitable for long-term reliable and stable operation in various harsh environments on industrial sites. They output 4-20mA signals corresponding to the corresponding range and are mainly used for detecting vibration acceleration of industrial equipment.

Product Details

Model: LZDL1-Y

1） Overview:
The industrial single axis current type LZDL1-Y is a current type accelerometer independently developed by our company. All its indicators meet the requirements proposed in ISO2954-1975 and GB13824-1992. This series of acceleration sensors adopts the principle of piezoelectric effect, processed by internal amplification circuit, voltage current conversion output, and two-wire circulating current working mode. Adopting a 4-20mA effective value output method, it has low noise and strong anti-interference ability, suitable for long-distance measurement, and is suitable for vibration acquisition in industrial systems such as PLC and DCS.
feature:
Embedded precision integrated circuit, effective value 4-20mA output
Isolation floating, industrial site monitoring, strong anti-interference performance

Application scope:
·Monitoring of rotating machinery equipment on industrial sites
·Health and safety monitoring in the industrial sector
·Monitoring of wind turbine bearings
·Steam turbine
·Compressor
·Oil and Natural Gas
·Gas pipeline

2） Main technical parameters:
1. Output mode: DC current output (4-20mA) (note: if the vibration value remains unchanged, the output current value remains unchanged)
2. Speed direction: from bottom to sensor (forward)
3. Environmental temperature: -40 ℃~+85 ℃
4. Frequency response: 1-2000Hz
5. Sensitivity: 16/selected range (mA/mm/s)
6. Accuracy: ± 1%
7. Resolution: 0.5mg RMS
8. Lateral sensitivity ratio: ≤ 5%
9. Power supply voltage:+12~+28VDC
10. Load resistance: ＜ 750 Ω
11. Range: 0 to ± 100g
12. Impact limit (peak): 2000g
13. Structural form: Shear
14. Piezoelectric material: PZT-5
15. Protection level: Ip67
16. Shell material: stainless steel
17. Weight: 80 grams